ACGRTS4002-HF

SMD General Purpose Rectifiers ACGRTS4001-HF Thru. ACGRTS4007-HF Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free TS/SOD-123FL 0.146(3.70) 0.137(3.50) Features - Ideal for surface mount applications. - Easy pick and place. - Low leakage current. - Meets MSL Level 1, per J-STD-020, LF maximum peak of 260°C. - AEC-Q101 Qualified. 0.043(1.10) 0.031(0.80) 0.075(1.90) 0.066(1.70) 0.114(2.90) 0.106(2.70) 0.008(0.20) 0.003(0.10) 0.039(1.00) 0.035(0.90) Mechanical data - Epoxy: UL94V-0 rated flame retardant. - Case: Molded plastic, SOD-123FL. - Terminals: Solderable per MIL-STD-750, method 2026. - Polarity: Indicated by cathode band. - Weight: 0.014 grams approx. 0.028(0.70) 0.015(0.40) 0.028(0.70) 0.015(0.40) Dimensions in inches and (millimeter) Circuit diagram Maximum Ratings (at T =25°C unless otherwise noted) A ACGRTS Parameter Symbol Maximum repetitive peak reverse voltage Unit 4001-HF 4002-HF 4003-HF 4004-HF 4005-HF 4006-HF 4007-HF VRRM 50 100 200 400 600 800 1000 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum averaged forward current IO 1.0 A Maximum Instantaneous forward voltage IF=1.0A @ 25°C VF 1.0 V IFSM 30 A Non-repetitive forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Reverse current at rated DC blocking voltage @TJ=25°C 10 μA IR @TJ=100°C Typical thermal resistance, Junction to ambient (Note1) Operating junction temperature Storage temperature range Typical junction capacitance f=1MHz and applied 4V DC reverse voltage 50 RθJA 75 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C CJ 6 pF Notes: 1. Thermal resistance from junction to ambient on FR4 PC board , 1"x1", 2 oz. Copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. REV:B0 Page 1 AQW-A3G02 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Rating and Characteristic Curves (ACGRTS4001-HF Thru. ACGRTS4007-HF) Fig.1 - Typical Current Derating Curve Fig.2 - Typical Forward Characteristics 100 Single phase, half wave, 60Hz, resistive or inductive load 1.2 TJ=25 OC Pulse width=300μs 1% duty cycle Forward Current, ΙF (A) Average Forward Current, IO (A) 1.4 1.0 0.8 0.6 0.4 10 1.0 0.1 0.2 1"x1", 2 oz. Copper pad areas 0.01 0 25 0 50 75 100 125 150 0.1 0.9 1.3 2.1 1.7 Forward Voltage, VF (V) Fig.3 - Non-repetitive Forward Surge Current Fig.4 - Typical Reverse Characteristics 50 Peak Forward Surge Current, IFSM (A) 0.5 Lead Temperature,TL (°C) 100.000 O TJ=25 C 8.3ms single half sine wave, JEDEC method TJ=150°C Reverse Current, IR (uA) 40 30 20 10 0 1 10 100 Number of Cycles at 60Hz TJ=125°C 10.000 TJ=100°C 1.000 TJ=75°C TJ=50°C 0.100 TJ=25°C 0.010 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage, (%) Fig.5 - Typical Junction Capacitance 20 f=1MHz Applied 4VDC reverse voltage Junction Capacitance, CJ (pF) 18 16 14 12 10 8 6 4 2 0 0 5 10 15 20 25 30 35 40 Reverse Voltage, VR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:B0 Page 2 AQW-A3G02 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Reel Taping Specification P0 d P1 E Index hole T F W B P A C 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed TS/SOD-123FL TS/SOD-123FL SYMBOL A B C d D D1 D2 (mm) 2.05 ± 0.10 3.85 ± 0.10 1.25 ± 0.10 1.55 ± 0.05 178.00 ± 1.00 60.00 ± 0.50 13.50 ± 0.20 (inch) 0.081 ± 0.004 0.152 ± 0.004 0.049 ± 0.004 0.061 ± 0.002 7.008 ± 0.039 2.362 ± 0.020 0.531 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.20 ± 0.05 8.00 ± 0.30 12.00 + 0.50 - 0 (inch) 0.069 ± 0.004 0.138 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.008 ± 0.002 0.315 ± 0.012 0.472 + 0.020 - 0 Company reserves the right to improve product design , functions and reliability without notice. REV:B0 Page 3 AQW-A3G02 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Marking Code Part Number Marking Code ACGRTS4001-HF A1 ACGRTS4002-HF A2 ACGRTS4003-HF A3 ACGRTS4004-HF A4 ACGRTS4005-HF A5 ACGRTS4006-HF A6 ACGRTS4007-HF A7 YY XX WW YY: Year code (Per AD ) WW: Weekly code XX: Product type marking code - Year Code: The last two number, AD 2017=17 - Weekly Code: 01~xx(The fast week~final week) Product code printed For example as follows: P/N: ACGRTS4005-HF Manufacture date_ Year: 2017 / Weekly:01 Product code printed: A5 17 01 Suggested P.C.B. PAD Layout D TS/SOD-123F SIZE (mm) (inch) A 3.10 0.122 B 1.15 0.045 C 1.25 0.048 D 4.25 0.167 E 1.95 0.077 A E C B Standard Packaging REEL PACK Case Type TS/SOD-123FL REEL Reel Size ( pcs ) (inch) 3,000 7 Company reserves the right to improve product design , functions and reliability without notice. REV:B0 Page 4 AQW-A3G02 Comchip Technology CO., LTD.