ACURB202-HF

SMD Ultra Fast Recovery Rectifiers ACURB201-HF Thru. ACURB207-HF Reverse Voltage: 50 to 1000 Volts Forward Current: 2 Amp RoHS Device Halogen Free DO-214AA(SMB) 0.191(4.85) 0.160(4.06) Features 0.087(2.20) 0.075(1.90) - High current capability. 0.155(3.94) 0.130(3.30) - High surge current capability. - Low reverse current. - AEC-Q101 Qualified 0.220(5.59) 0.200(5.07) 0.012(0.30) 0.006(0.15) 0.100(2.55) 0.084(2.13) Mechanical data 0.010(0.25) Max. 0.060(1.52) - Epoxy: UL flammability classification rating 94V-0 0.030(0.75) - Case: Molded plastic, DO-214AA/SMB Dimensions in inches and (millimeter) - Terminals: Lead free plating(Tin Finish), Solderable per MIL-STD-202, method 208. Circuit Diagram - Polarity: Cathode band. Maximum Ratings and Electrical Characteristics (at T =25°C unless otherwise noted) A Parameter Symbol ACURB ACURB ACURB ACURB ACURB ACURB ACURB 201-HF 202-HF 203-HF 204-HF 205-HF 206-HF 207-HF Unit Max. repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 V Max. RMS voltage VRMS 35 70 140 280 420 560 700 V Max. average forward rectified current IF 2 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load IFSM 50 A Max. instantaneous forward voltage IF=2A @ 25°C VF Max. reverse recovery time (Note 2) Trr Max. DC reverse current at rated DC blocking voltage IR 5 100 µA CJ 20 pF RθJC 40 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C TA=25°C TA=100°C Typical junction capacitance (Note 1) Typical thermal resistance Operating temperature range Storage temperature range 1.3 1.0 50 1.7 V 75 nS Notes: 1. Measured at 1.0MHZ and applied reverse voltage of 4.0V DC 2. Reverse recovery test conditions: IF=0.5A, IR=1A, IRR=0.25A Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 1 AQW-JU004 Comchip Technology CO., LTD. SMD Ultra Fast Recovery Rectifiers Rating and Characteristics Curvers (ACURB201-HF Thru. ACURB207-HF) Fig.1 - Typical Forward Current Derating Curve Fig.2 - Typical Forward Characteristics 100 Instantaneous Forward Current, (A) Average Forward Current, (A) 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 ~A 10 HF 1- 0 B2 -HF 04 B2 R U AC R CU A 1.0 F -H 07 2 RB CU ~A HF 05 0.1 B2 UR AC 0.01 0.2 150 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Case Temperature, (°C) Forward Voltage, (V) Fig.3 - Maximum Non-repetitive Forward Surge Current Fig.4 - Typical Reverse Characteristics 100 50 TJ=25°C 8.3ms single half sine wave Reverse Leakage Current, (µA) Peak Forward Surge Current, (A) F -H 03 B2 R CU 40 30 20 10 0 10 1 100 Number of Cycles at 60Hz 100°C 10 1.0 25°C 0.1 0.01 20 40 60 80 100 Percentage Rated Peak Reverse Voltage, (%) Fig.5 - Typical Junction Capacitance Junction Capacitance, (pF) 60 50 40 30 20 10 0 0 1 10 100 Reverse Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 2 AQW-JU004 Comchip Technology CO., LTD. SMD Ultra Fast Recovery Rectifiers Reel Taping Specification d P0 P1 T E Index hole F B W C P A W2 12 o 0 D1 D2 D W1 Trailer Device ....... ....... End ....... ....... ....... ....... Leader ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AA (SMB) DO-214AA (SMB) SYMBOL A B C d D D1 D2 E (mm) 4.00 Max. 5.90 Max. 3.00 Max. 1.50 ± 0.10 330.00 ± 2.00 50.00 Min. 13.50 ± 1.00 1.75 ± 0.10 (inch) 0.157 Max. 0.232 Max. 0.118 Max. 0.059 ± 0.004 12.992 ± 0.079 1.969 Min. 0.531 ± 0.039 0.069 ± 0.004 SYMBOL F P P0 P1 T W W1 W2 (mm) 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.60 Max. 12.00 ± 0.30 18.40 Max. 14.40 Max. 0.024 Max. 0.472 ± 0.012 0.724 Max. 0.567 Max. (inch) 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 3 AQW-JU004 Comchip Technology CO., LTD. SMD Ultra Fast Recovery Rectifiers Marking Code C : Comchip logo Part Number Marking Code ACURB201-HF 201 ACURB202-HF 202 ACURB203-HF 203 ACURB204-HF 204 ACURB205-HF 205 ACURB206-HF 206 ACURB207-HF 207 B : Package (SMB) C B U XXX XXX : Product type marking code S : Special code (CURX) : Cathode band Suggested PAD Layout A DO-214AA(SMB) E SIZE (mm) (inch) A 6.80 0.268 B 1.80 0.071 C 2.30 0.091 D 2.50 0.098 E 4.30 0.169 B C D Note: 1. The pad layout is for reference purposes only. Standard Packaging REEL PACK Case Type DO-214AA (SMB) REEL Reel Size ( pcs ) (inch) 3,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 4 AQW-JU004 Comchip Technology CO., LTD.