ACZRC5364B-G

SMD Zener Diode ACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. SMC/DO-214AB - Low leakage. 0.281(7.15) 0.260(6.60) - Built-in strain relief. - Low inductance. - High peak reverse power dissipation. 0.126(3.20) 0.114(2.90) 0.238(6.04) 0.219(5.55) - For use in stabilizing and clipping circuits with high power. - Comply with AEC-Q101 0.313(7.95) 0.305(7.75) Mechanical data 0.012(0.30) 0.006(0.15) 0.100(2.53) 0.078(1.98) - Case: DO-214AB(SMC), Molded plastic. - Epoxy: UL 94V-0 rate flame retardant. 0.059(1.51) 0.030(0.75) - Terminals: Solderable per MIL-STD-750 ,method 2026 guranteed. 0.008(0.20) 0.000(0.00) Dimensions in inches and (millimeter) - Polarity: Color band denotes cathode end. Circuit diagram - Mounting position: Any. - Weight: 0.230 gram (approx.) Maximum Ratings (TA=25°C unless otherwise noted) Symbol Value Units DC power dissipation at TL = 75°C (Note1) PD 5 W Maximun forward voltage at IF=1A VF 1.2 V Junction temperature range TJ -55 to +150 °C Storage temperature range TSTG -55 to +150 °C Parameter Note: 2 (1) Mounted on 5.0mm (1oz thick) Iand areas, lead temperature at TL=75°C. Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 1 AQW-BZ003 Comchip Technology CO., LTD. SMD Zener Diode RATING AND CHARACTERISTIC CURVES (ACZRC5340B-G Thru. ACZRC5388B-G) Fig.2 - Temperature coefficients v.s. Zener voltage Fig.1 - Power temperature derating current Temperature coefficient, θVZ (mV/°C) Power dissipation, PD (W) 5.0 4.0 3.0 2.0 1.0 0 25 50 75 100 125 150 10 Range 1 10 175 100 Lead Temperature, TL (°C) Zener voltage, Vz (V) Fig.3 - Typical thermal resistance v.s. lead length Fig.4 - Maximum surge power 40 100 Peak surge power, Ppk (W) Junction to lead thermal resistance, θJL, (°C/W) 0 100 30 20 10 10 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 10 1 Lead length to heatsink, L (inches) 100 1000 Pulse width, PW (ms) Fig.5- Typical thermal response L, lead length=3/8 inch Junction to lead trensient thermal resistance θJL(t,D), (°C/W) 100 D=0.5 10 D=0.2 D=0.1 1 D=0.05 D=0.01 D=0 0.1 0.001 Note: Below 0.1 second, Thermal response curve is applicable to any lead length (L) 0.01 0.1 Time, t (s) 1 Single pulse ΔTJL-ΘJL(t)Ppk repctitive pulse ΔTJL=ΘJL(t,D)Ppk 10 Company reserves the right to improve product design , functions and reliability without notice. 100 REV: D Page 2 AQW-BZ003 Comchip Technology CO., LTD. SMD Zener Diode Electrical Characteristics (at TA=25°C unless otherwise specified) Nominal Maximum Maximum Reverse Zener Voltage Zener Impedance Leakage Current Part Number ACZRC5340B-G ACZRC5341B-G ACZRC5342B-G ACZRC5343B-G ACZRC5344B-G ACZRC5345B-G ACZRC5346B-G ACZRC5347B-G ACZRC5348B-G ACZRC5349B-G ACZRC5350B-G ACZRC5351B-G ACZRC5352B-G ACZRC5353B-G ACZRC5354B-G ACZRC5355B-G ACZRC5356B-G ACZRC5357B-G ACZRC5358B-G ACZRC5359B-G ACZRC5360B-G ACZRC5361B-G ACZRC5362B-G ACZRC5363B-G ACZRC5364B-G ACZRC5365B-G ACZRC5366B-G ACZRC5367B-G ACZRC5368B-G ACZRC5369B-G ACZRC5370B-G ACZRC5371B-G ACZRC5372B-G ACZRC5373B-G ACZRC5374B-G ACZRC5375B-G ACZRC5376B-G ACZRC5377B-G Maximum DC Zener Current Marking Code VZ @ IZT IZT ZZT @ IZT ZZK @ IZK IZK IZM (V) (mA) (Ohm) (Ohm) (mA) (uA) (V) (mA) 6.0 200 1.0 300 1 1.0 3.0 790.0 340B IR @ VR 6.2 200 1.0 200 1 1.0 3.0 765.0 341B 6.8 175 1.0 200 1 10.0 5.2 700.0 342B 7.5 175 1.5 200 1 10.0 5.7 630.0 343B 8.2 150 1.5 200 1 10.0 6.2 580.0 344B 8.7 150 2.0 200 1 10.0 6.6 545.0 345B 9.1 150 2.0 150 1 7.5 6.9 520.0 346B 10.0 125 2.0 125 1 5.0 7.6 475.0 347B 11.0 125 2.5 125 1 5.0 8.4 430.0 348B 12.0 13.0 100 100 2.5 2.5 125 100 1 1 2.0 1.0 9.1 9.9 395.0 365.0 349B 350B 14.0 100 2.5 75 1 1.0 10.6 340.0 351B 15.0 75 2.5 75 1 1.0 11.5 315.0 352B 16.0 75 2.5 75 1 1.0 12.2 295.0 353B 17.0 70 2.5 75 1 0.5 12.9 280.0 354B 18.0 65 2.5 75 1 0.5 13.7 265.0 355B 19.0 65 3.0 75 1 0.5 14.4 250.0 356B 20.0 65 3.0 75 1 0.5 15.2 237.0 357B 22.0 50 3.5 75 1 0.5 16.7 216.0 358B 24.0 50 3.5 100 1 0.5 18.2 198.0 359B 25.0 50 4.0 110 1 0.5 19.0 190.0 360B 27.0 50 5.0 120 1 0.5 20.6 176.0 361B 28.0 50 6.0 130 1 0.5 21.2 170.0 362B 30.0 40 8.0 140 1 0.5 22.8 158.0 363B 33.0 40 10.0 150 1 0.5 25.1 144.0 364B 36.0 30 11.0 160 1 0.5 27.4 132.0 365B 39.0 43.0 30 30 14.0 20.0 170 190 1 1 0.5 0.5 29.7 32.7 122.0 110.0 366B 367B 47.0 51.0 25 25 25.0 27.0 210 230 1 1 0.5 0.5 35.8 38.8 100.0 93.0 368B 369B 56.0 60.0 20 20 35.0 40.0 280 350 1 1 0.5 0.5 42.6 45.5 86.0 79.0 370B 371B 62.0 20 42.0 400 1 0.5 47.1 76.0 372B 68.0 20 44.0 500 1 0.5 51.7 70.0 373B 75.0 20 45.0 620 1 0.5 56.0 63.0 374B 82.0 15 65.0 720 1 0.5 62.2 58.0 375B 87.0 15 75.0 760 1 0.5 66.0 54.5 376B 91.0 15 75.0 760 1 0.5 69.2 52.5 377B Notes: (1) The type number listed have a standard tolerance on th nominal zener voltage of ± 5%. (2) The reverse surge current is a non-repetitive,8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method. Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 3 AQW-BZ003 Comchip Technology CO., LTD. SMD Zener Diode Electrical Characteristics (at TA=25°C unless otherwise specified) Part Number ACZRC5378B-G ACZRC5379B-G ACZRC5380B-G ACZRC5381B-G ACZRC5382B-G ACZRC5383B-G ACZRC5384B-G ACZRC5385B-G ACZRC5386B-G ACZRC5387B-G ACZRC5388B-G Nominal Maximum Maximum Reverse Zener Voltage Zener Impedance Leakage Current Maximum DC Zener Current Marking Code VZ @ IZT IZT ZZT @ IZT ZZK @ IZK IZK IZM (V) (mA) (Ohm) (Ohm) (mA) (uA) (V) (mA) 100.0 110.0 12 12 800 1000 1 1 0.5 0.5 76.0 83.6 47.5 43.0 378B 379B 120.0 10 90.0 125.0 170.0 1150 1 0.5 91.2 39.5 380B 130.0 10 190.0 1250 1 0.5 98.8 36.6 381B 140.0 8 230.0 1500 1 0.5 106.0 34.0 382B 150.0 8 330.0 1500 1 0.5 114.0 31.6 383B 160.0 8 350.0 1650 1 0.5 122.0 29.4 384B 170.0 8 380.0 1750 1 0.5 129.0 28.0 385B 180.0 5 430.0 1750 1 0.5 137.0 26.4 386B 190.0 5 450.0 1850 1 0.5 144.0 25.0 387B 200.0 5 480.0 1850 1 0.5 152.0 23.6 388B IR @ VR Notes: (1) The type number listed have a standard tolerance on th nominal zener voltage of ± 5%. (2) The reverse surge current is a non-repetitive,8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method. Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 4 AQW-BZ003 Comchip Technology CO., LTD. SMD Zener Diode Reel Taping Specification d P0 P1 T E Index hole F W B P C A W1 12 o 0 D2 D1 D W2 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed SYMBOL DO-214AB (SMC) A C (mm) SYMBOL (mm) (inch) d T D D1 D2 1.55 ± 0.05 0.40 (Max.) 330.00 50.00 (Min.) 0.50 13.00 +- 0.20 0.061 ± 0.002 0.016 (Max.) 13.000 1.969 (Min.) 0.020 0.512 +- 0.008 P0 P1 W W1 W2 See Note 1 (inch) DO-214AB (SMC) B E F P 2.00 8.00 ± 0.10 1.75 ± 0.10 7.50 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 16.00 ± 0.10 16.40 +- 0.00 0.079 0.069 ± 0.004 0.295 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.630 ± 0.004 0.646 +- 0.000 22.40 (Max.) 0.882 (Max.) Notes: 1. A, B, and C the clearance between the component and the cavity must be within 0.5 mm max. for 8 mm tape and 12 mm tape, 1.0 mm max. for 16mm tape and 24 mm tape. Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 5 AQW-BZ003 Comchip Technology CO., LTD. SMD Zener Diode Marking Code Part Number Marking Code ACZRC5340B-G Thru. ACZRC5388B-G Series XXXX XXXX 3. XXXX: Marking code (see Page.3~4) 4. ▌: Cathod Band Suggested PAD Layout A DO-214AB(SMC) SIZE (mm) (inch) A 8.13 0.320 B 4.69 MAX 0.185 MAX C 1.52 MIN 0.060 MIN D 3.20 MIN 0.126 MIN B D C Standard Packaging REEL PACK Case Type DO-214AB (SMC) REEL Reel Size ( pcs ) (inch) 3,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 6 AQW-BZ003 Comchip Technology CO., LTD.