AS1J-HF

SMD General Purpose Rectifiers AS1D-HF Thru. AS1M-HF Reverse Voltage: 200 to 1000 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free Features SMA/DO-214AC - For surface mounted applications. - Ideal for automated placement. 0.181(4.60) 0.156(3.95) - Low forward voltage drop. 0.110(2.80) 0.094(2.40) 0.065(1.65) 0.053(1.35) - High surge current capability. - AEC-Q101 Qualified 0.008(0.20) Typ. Mechanical data 0.085(2.15) 0.073(1.85) - Case: SMA/DO-214AC, molded plastic. 0.059(1.50) 0.035(0.90) - Epoxy: UL 94V-0 rate flame retardant. 0.008(0.20) Max. 0.211(5.35) 0.191(4.85) - Terminals: Solderable per MIL-STD-202, method 208. - Polarity: Color band denotes cathode end. Dimensions in inches and (millimeter) Circuit Diagram Anode Cathode Maximum Ratings (T =25°C unless otherwise noted) A Symbol AS1D-HF AS1G-HF AS1J-HF AS1K-HF AS1M-HF Unit Peak repetitive reverse voltage VRRM 200 400 600 800 1000 V RMS reverse voltage VRMS 140 280 420 560 700 V DC blocking voltage VDC 200 400 600 800 1000 V Max. average forward output current IF(AV) 1 A Peak forward surge current, 8.3ms single half-sine-wave @TJ=25°C IFSM 30 A Typical thermal resistance (Note 1) RθJA RθJC RθJL 70 25 30 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Parameter Operating junction temperature range Storage temperature range Notes: 1. Device mounted on PCB with 10mm x 20mm x 0.1mm copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 1 ASP-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Electrical Characteristics (T =25°C unless otherwise noted) A Symbol Parameter Typ Test conditions Maximum instantaneous forward voltage VF IF = 1.0A Maximum reverse current IR Rated VR Max Unit 1.1 V @TA=25°C 5 @TA=125°C 50 µA Rating and Characteristic Curves (AS1D-HF Thru. AS1M-HF) Fig.1 - Forward Current Derating Curve Fig.2 - Surge Current Derating Curve Peak Forward Surge Current, IFSM (A) 30 Average Current, (A) 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 25 20 15 10 5 0 150 100 Ambient Temperature, (°C) Number of Cycles at 60Hz Fig.3 - Typical Forward Characteristics Fig.4 - Typical Reverse Characteristic 10 10 TJ=125°C TJ=125°C Reverse Current, IR (µA) Forward Current, IF (A) 10 1 TJ=100°C TJ=75°C 1 TJ=25°C 0.1 0.6 0.8 1.0 1.2 TJ=100°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0.001 10 Forward Voltage,VF (V) 20 30 40 50 60 70 80 90 100 Reverse Voltage, VR (%) Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 2 ASP-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Reel Taping Specification d P0 T P1 E Index hole F B W C P A 12 o 0 D1 D2 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.72 ± 0.10 5.27 ± 0.10 2.27 ± 0.10 1.55 ± 0.10 330 ± 1.00 75.00 ± 1.00 13.50 ± 0.50 (inch) DO-214AC (SMA) 0.107 ± 0.004 0.207 ± 0.004 0.089 ± 0.004 0.061 ± 0.004 12.992 ± 0.039 2.953 ± 0.039 0.531 ± 0.020 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 0.25 ± 0.05 12.00 ± 0.10 13.50 ± 1.00 (inch) 0.069 ± 0.004 0.217 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.010 ± 0.002 0.472 ± 0.004 0.531 ± 0.039 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 3 ASP-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Marking Code Part Number Marking Code AS1D-HF S1D AS1G-HF S1G AS1J-HF S1J ASJK-HF S1K AS1M-HF S1M Product type marking code XXX XX Control code Cathode Band Suggested PAD Layout C DO-214AC (SMA) SIZE (mm) (inch) A A 1.67 0.066 B 2.08 0.082 C 4.18 0.165 B Note: 1. The pad layout is for reference purpose only. Standard Packaging REEL PACK Case Type DO-214AC (SMA) REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 4 ASP-JG001 Comchip Technology CO., LTD.