ATV50C151JB-HF

SMD Transient Voltage Suppressor ATV50C110-G Thru. ATV50C441-G Working Voltage: 11 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Features SMC/DO-214AB - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% 0.281(7.15) 0.260(6.60) - Low leakage. 0.126(3.20) 0.114(2.90) 0.238(6.04) 0.219(5.55) - Uni and Bidirectional unit. - Excellent clamping capability. - Comply with AEC-Q101 0.313(7.95) 0.305(7.75) - Very fast response time. - UL recognized file # E349157 0.012(0.30) 0.006(0.15) R 0.100(2.53) 0.078(1.98) Mechanical Data 0.059(1.51) 0.030(0.75) 0.008(0.20) 0.000(0.00) - Case: DO-214AB/SMC molded plastic. - Epoxy: UL 94V-0 rate flame retardant Dimensions in inches and (millimeter) - Lead: Solderable per MIL-STD-750, method 2026. - Polarity: Color band denoted cathode end except bipolar. Circuit Diagram Bi-directional Uni-directional - Mounting position: Any - Weight: 0.230 gram (approx.) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Units Peak power dissipation with a 10/1000μs waveform (Note 1) PPP 5000 W Peak pulse current with a 10/1000μs waveform (Note 1) IPP See Next Table A Power dissipation on infinite heatsink at TL=75°C PD 6.5 W Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) IFSM 300 A Maximum instantaneous forward voltage at 100A for unidirectional only (Note 3) VF 3.5/5.0 V TJ, TSTG -55 to +150 °C Parameter Operation junction and storage temperature range Notes: 1. Non-repetitive current pulse, per Fig.5 and derated above TA=25°C, per Fig.1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 3. VF