CDBB240L-G

SMD Schottky Barrier Rectifier CDBB220L-G THRU CDBB2100L-G Reverse Voltage: 20 ~ 100 Volts Forward Current: 2.0 Amp Features Low forward voltage drop High current capability High reliability High surge current capability SMB/DO-214AA 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.155(3.94) 0.130(3.30) Mechanical Data Case: Molded plastic SMB/DO-214AA Eposy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-750 method 2026 Mounting position: Any Weight: 0.093 gram 0.012(0.31) 0.006(0.15) 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.030(0.76) 0.008(0.20) 0.203(0.10) 0.220(5.59) 0.200(5.08) Dimensions in inches and (millimeter) Maximum Rating and Electrical Characteristics Rating at 25ºC ambient temperature unless specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTIC Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TL=100 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage @ 2.0 A Maximum DC Reverse Current @TJ=25 C At Rated DC Blocking Voltage @TJ=125 C Typical junction Capacitance (Note 1) Operating Junction and Storage Temperature Range o o o SYBMOL VRRM VRMS VDC I(AV) CDBB 220L-G 20 14 20 CDBB 240L-G 40 28 40 CDBB 260L-G 60 42 60 2.0 CDBB 280L-G 80 56 80 CDBB UNIT 2100L-G 100 70 100 V V V A IFSM 50 A VF 0.5 0.7 0.5 1.0 200 -55 to +175 0.85 V IR CJ TJ, TSTG mA pF o C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. “-G” suffix designates RoHS compliant Version SMD Schottky Barrier Rectifier Rating and Characteristic Curevs (CDBB220L-G Thru CDBB2100L-G) FIG.1 - FORWARD CURRENT DERATING CURVE 2.0 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 1.6 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 40 1.2 30 0.8 20 0.4 60 Hz Resistive or Inductive load 0 0 25 50 75 100 125 o 10 0 150 175 1 10 100 LEAD TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES CDBB220L-G~CDBB240L-G CDBB260L-G 1.0 CDBB280L-G~CDBB2100L-G FIG.4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) 10 10 TJ=125 C 1 o 0.1 0.1 0.01 TJ=25 C o 0.01 0.2 0.4 0.6 0.8 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 1.2 1.4 1.6 o 0.001 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS