CZRB2310

Surface Mount Zener Diodes COMCHIP www.comchiptech.com CZRB2110 -CZRB2350 V oltage:110-350 Volts Power: 2.0 Watts Features L ow profile package Built-in strain relief 5 & 10% Voltage Tolerances available Excellent clamping capability Wide voltage range Meets UL specification 94V-0 SMB/DO-214AA 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.155(3.94) 0.130(3.30) Mechanical Data C ase: JEDEC DO-214AA molded plastic Terminals: Solder plated, solderable MILSTD-750, method 2026 Weight: 0.003 ounce, 0.093 gram Polarity: Color band denotes cathode end Mounting position: Any Approx. Weight:0.093 gram 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.030(0.76) 0.012(0.31) 0.006(0.15) 0.220(5.59) 0.200(5.08) 0.008(0.20) 0.203(0.10) Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characterics Maximum R atings DC Power Dissipation with TL = 75 °C . ..PD Lead Length = .375 Inches Derate Above 50°C Operating & Storage Temperature Range...TJ , T S T R G CZR B2 110 to CZR B2 350 2 6.67 -65 to 100 U n i ts W att m W/°C °C MDS0304002A Page 1 Surface Mount Zener Diodes COMCHIP www.comchip.com.tw Rating and Characteristic Curevs (CZRB2110 Thru CZRB2350) ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Device Nominal Zener Voltage VZ (Volts) Test Current IZT (mA) Maximum Zener Impedance ZZT @ IZT (Ohms) Max. Reverse Leakage Current IR @ (uA) ZZK @ IZK (Ohms) IZK (mA) VR (Volts) Maximum Forward Voltage @ IF = 0.2A (Volts) CZRB2110 CZRB2115 CZRB2120 CZRB2130 CZRB2140 CZRB2150 CZRB2160 CZRB2170 CZRB2180 CZRB2190 CZRB2200 CZRB2210 CZRB2220 CZRB2230 CZRB2240 CZRB2250 CZRB2260 CZRB2270 CZRB2280 CZRB2290 CZRB2300 CZRB2310 CZRB2320 CZRB2330 CZRB2340 CZRB2350 110 115 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 750 750 850 1000 1200 1300 1500 2200 2200 2500 2500 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 8000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9000 9500 9500 9500 9500 9500 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 80 85 90 95 105 110 120 130 140 150 165 165 170 175 180 190 195 200 210 215 220 225 233 240 250 260 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 Note: 1. For 10% Tolerance on Zener Voltage, Specify No Suffix. 2. TA = 25°C unless otherwise specified. Measurements m ade at Thermal Equilibrium. MDS0304002A Page 2 Surface Mount Zener Diodes COMCHIP www.comchip.com.tw Rating and Characteristic Curevs (CZRB2110 Thru CZRB2350) FIG. 2 - ZENER VOLTAGE VERSUS ZENER CURRENT FIG. 1 - MAXIMUM CONTINUOUS POWER DISSIPARION 10 REVERSE POWER DISSIPATION, WATTS IZ, ZENER CURRENT (mA) 2 5 2 1 0.5 0.2 0.1 SINGLE PHASE HALF WAVF 60HZ RESISTIVE OR INDUCTIVE LOAD 0.375”(9.5mm) LEAD LENGTHS 0 25 50 75 100 125 150 175 100 150 200 250 300 350 400 VZ, ZENER VOLTAGE (VOLTS) LEAD TEMPERATURE, FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT,MICROAMPERES 10 4 1.0 .4 0.1 .04 .01 0 20 40 60 80 100 120 140 TJ=25 1.0 0.1 TJ=25 PULSE WIDTH=300us 1% DUTY CYCLE PERCENT OF RATED ZENER VOLTAGE .01 .4 .6 .8 1.0 1.2 1.4 1.6 TEMPERATURE COEFFICIENT (mV/ ) IZT FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1000 500 200 100 50 20 10 10 20 50 100 200 400 1000 VZ VZ ZENER VOLTAGE IZT(VOLTS) MDS0304002A Page 3