CZRT55C12

Surface Mount Zener Diodes COMCHIP www.comchip.com.tw CZRT55C4V7 Thru CZRT55 C39 V oltage: 2.4 - 39 Volts Power: 410 mWatts Features P lanar Die construction 410mW Power Dissipation Zener Voltages from 2.4V - 39V Ideally Suited for Automated Assembly Processes SOT-23 .119 (3.0) .110 (2.8) .020 (0.5) Top View .056 (1.40) .047 (1.20) 3 Mechanical data .006 (0.15)max. .006 (0.15) .002 (0.05) C ase: SOT-23, Plastic Terminals: Solderable per MIL-STD-202, Method 208 Approx. Weight: 0.008 gram SINGLE 1 2 .037(0.95) .037(0.95) .020 (0.5) .020 (0.5) .103 (2.6) .086 (2.2) Dimensions in inches (millimeters) CDST4148 Maximum Ratings and Electrical Characterics Parameter Power Dissipation (Note A) at 75°C Peak Forward Surge Current Surge, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) (Note B) Operating Junction and Storage Temperature Range Symbol PD IFSM TJ Value 410 2.0 -55 to +150 Units mW Amps °C NOTES: A. Mounted on 5.0mm2(.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. M DS0211014A .044 (1.10) .035 (0.90) Page 1 Surface Mount Zener Diodes Maximum Ratings and Electrical Characterics (TA=25°C unless otherwise noted) V F=1.2V max, I F=100mA for all types COMCHIP www.comchip.com.tw Nominal Zener Voltage Part Number VZ @ IZT Nom. V Min. V Max. V Max. Zener Impedance ZZT @ IZT Ohm mA ZZK @ IZK Ohm mA Max Reverse Leakage Current IR @ VR nA V Typical Temp. Coefficient TC Max Zener Current IZM@ TA mA 410 mWatts Zener Diodes CZRT55C2V4 CZRT55C2V7 CZRT55C3V0 CZRT55C3V3 CZRT55C3V6 CZRT55C3V9 CZRT55C4V3 CZRT55C4V7 CZRT55C5V1 CZRT55C5V6 CZRT55C6V2 CZRT55C6V8 CZRT55C7V5 CZRT55C8V2 CZRT55C9V1 CZRT55C10 CZRT55C11 CZRT55C12 CZRT55C13 CZRT55C15 CZRT55C16 CZRT55C18 CZRT55C20 CZRT55C22 CZRT55C24 CZRT55C27 CZRT55C30 CZRT55C33 CZRT55C36 CZRT55C39 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 11.0 12.0 13.0 15 16 18 20 22 24 27 30 33 36 39 2.28 2.5 2.8 3.1 3.4 3.7 4 4.4 4.8 5.2 5.8 6.4 7 7.7 8.5 9.4 10.4 11.4 12.4 13.8 15.3 16.8 18.8 20.8 22.8 25.1 28 31 34 37 2.56 2.9 3.2 3.5 3.8 4.1 4.6 5 5.4 6 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.6 17.1 19.1 21.2 23.3 25.6 28.9 32 35 38 41 85 83 95 95 95 95 95 78 60 40 10 8 7 7 10 15 20 20 25 30 40 50 50 55 80 80 80 80 90 90 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 600 500 500 500 500 500 500 500 480 400 200 150 50 50 50 70 70 90 110 110 170 170 220 220 220 250 250 250 250 300 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 100000 75000 50000 25000 15000 10000 5000 5000 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 1 1 1 1 1 1 2 0.8 1 2 3 5 6 7 7.5 8.5 9 10 11 12 14 15 17 18 20 22.5 25 27 29 -0.075 -0.065 -0.06 -0.055 -0.055 -0.05 -0.035 -0.015 0.005 0.02 0.03 0.045 0.05 0.055 0.065 0.07 0.075 0.08 0.08 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.11 134 118 109 100 92 84 76 67 59 54 49 44 40 36 33 30 28 25 23 20 18 17 16 13 12 10 9 9 8 NOTE: 1.Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%. 2.Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body. 4.Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 5.Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5. M DS0211014A Page 2 Surface Mount Zener Diodes COMCHIP www.comchip.com.tw Rating and Characteristic Curves (CZRT55C4V7 Thru CZRT55C39) 8 7 100 TEMPERATURE COEFFICIENT,mV / oC) 6 5 4 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 12 TEMPERATURE COEFFICIENT,mV / oC) 10 1 10 100 NOMINAL ZENER VOLTAGE, Volts NOMINAL ZENER VOLTAGE, Volts TYPICAL REVERSE CURRENT 1000 DYNAMIC IMPEDANCE, W 1000 IZ = 1 mA FORWARD CURRENT, mA TJ=25 C IZ(AC)=0.1IZ(DC) F=1 kHZ O 100 5 mA 20 mA 100 10 10 150 C 75OC O 25OC 5C O 1 1 10 NORMAL ZENER VOLTAGE, Volts 100 1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE, Volts TYPICAL FORWARD VOLTAGE 1.2 1.0 0.8 0.6 1000 0 V BIAS 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 TA=25 C o POWER DISSIPATION, Watts PD V.S. TA 0.4 0.2 0 CAPACITANCE, pF 75 100 125 150 25 50 155 1 1 10 NOMINAL ZENER VOLTAGE, Volts 100 TEMPERATURE (oC) MDS0211014A Page 3 Surface Mount Zener Diodes COMCHIP www.comchip.com.tw Rating and Characteristic Curves (CZRT55C4V7 Thru CZRT55C39) 100 TA=25 C ZENER CURRENT, mA ZENER CURRENT, mA o 100 TA=25oC 10 10 1 1 0.1 0.1 0.01 0 2 4 6 8 10 12 0.01 10 30 50 70 90 ZENER VOLTAGE, Volts ZENER VOLTAGE, Volts ZENER VOLTAGE V.S. ZENER CURRENT 1000 LEAKAGE CURRENT (mA) 100 10 1 0.1 0.01 0.001 0.0001 0.00001 0 10 20 30 40 50 60 70 +150OC +25OC -55 C 80 90 O NOMINAL ZENER VOLTAGE, Vlots MDS0211014A Page 4