FR8A07-G

Glass Passivated Fast Recovery Rectifier FR8A01-G THRU FR8A07-G Voltage Range 50 to 1000 V TO-220AC Current 8.0 Ampere Features .185(4.70) MAX.412(10.5) .175(4.44) .154(3.91) Fast switching for high efficiency .055(1.40) .06(1.52) DIA .148(3.74) .045(1.14) .05(1.27) Low forward voltage drop High current capability .594(15.1) .587(14.9) PIN Low reverse leakage current 1 2 High surge current capability Mechanical Data .56(14.22) .11(2.79) .53(13.46) Case: Molded plastic TO-220AC .10(2.54) .037(0.94) .027(0.68) Epoxy: UL 94V-0 rate flame retardant .025(0.64) .205(5.20) Terminals: Solderable per MIL-STD-202 .014(0.35) .195(4.95) 1 method 208 2 Polarity:Color band denotes cathode Dimensions in inches and (millimeters) Mounting position: Any Weight: 2.03 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .16(4.06) .14(3.56) Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TC=100 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 8.0 A Maximum DC Reverse Current @TJ=25 C At Rated DC Blocking Voltage @TJ=125 C Maximum Reverse Recovery Time (Note 1) Typical junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range o o o FR FR FR FR FR FR FR UNIT 8A01-G 8A02-G 8A03-G 8A04-G 8A05-G 8A06-G 8A07-G 50 35 50 100 70 100 200 140 200 400 280 400 8.0 600 420 600 800 560 800 1000 700 1000 V V V A VRRM VRMS VDC IF(AV) IFSM 150 MAX.05(1.5) .27(6.86) .23(5.84) A VF 1.3 10.0 250 150 65 2.2 -55 to + 150 o V uA uA 250 500 nS pF CW o IR Trr CJ R JC TJ, TSTG C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to case. COMCHIP TECHNOLOGY 4115 CLIPPER CT. FREMONT CA 94538 TEL: (510) 657-8671 FAX: (510) 657-8921 Glass Passivated Fast Recovery Rectifier RATINGS AND CHARACTERISTIC CURVES FR8A01-G THRU FR8A07-G FIG.1 - FORWARD CURRENT DERATING CURVE 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 50 100 o FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 125 100 75 50 25 60 Hz Resistive or Inductive load 150 0 1 10 100 CASE TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 TJ=125 C o 1.0 10 0.1 1 TJ=25 C o 0.01 0.2 0.4 0.6 0.8 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 1.2 1.4 1.6 o 0.1 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS COMCHIP TECHNOLOGY 4115 CLIPPER CT. FREMONT CA 94538 TEL: (510) 657-8671 FAX: (510) 657-8921