KBU606

Silicon Bridge Rectifiers COMCHIP www.comchiptech.com KBU600 Thru 610 R everse Voltage: 50 - 1000 Volts Forward Current: 6.0 Amp KBU F eatures D iffused Junction Low Forward Voltage Drop H igh Current Capability High Reliability High Surge Current Capability Ideal for Printed Circuit Boards Mechanical Data C ase: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 W eight: 1.7 grams (approx.) Mounting Position: Any Marking: Type Number KBU Dim Min Max A 23.70 22.7 B 4.10 3.80 C 4.70 4.20 D 2.20 1.70 E 11.30 10.30 G 6.80 4.50 H 5.60 4.60 J 25.40 K 19.30 L 17.80 16.80 M 7.10 6.60 N 5.20 4.70 P 1.20 1.30 All Dimensions in mm Maximum Ratings and Electrical Characterics Single Phase, half wave, 60Hz, resisti ve or induct ive load. For capacitive load, derate current by 20%. CHARACTERISTICS Peak Repetitiv e Reverse Voltage Working Peak Reverse Volt age DC Blocking Voltage RMS Reverse Volt age Average Recti fied Output Current @ T A = 100°C Non-Repetitiv e Peak Forward Surge Current 8.3m s Single half sine-wave superimposed on rat ed load (JEDEC Method) Forward Voltage (per elem ent) @I F = 3.0A Peak Reverse Current @ TC = 25°C At Rated DC Blocki ng Voltage @T C = 100°C Rating for Fusing (t < 8.3ms) (Note1) Typical Thermal Resistance (Note2) Operating and Storage T emperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IR I2 t R JC Tj, TSTG 35 70 140 280 6.0 250 1.0 10 1.0 166 4.2 -65 to +150 420 560 700 V A A V uA mA A2s K/W °C 50 100 200 400 600 800 1000 V KBU 600 KBU 601 KBU 602 KBU 604 KBU 606 KBU 608 KBU 610 UNIT Note: 1. Non-repetiti ve for t > 1ms and < 8.3m s. 2. Thermal resistance junction to ambient mounted on PC board with 13.0 x 13. 0 x 0.03mm thick land areas. MDS0306003A Page 1 Silicon Bridge Rectifiers Rating and Characteristic Curves (KBU600 - KBU610) COMCHIP www.comchiptech.com M DS0306003A Page 2 Silicon Bridge Rectifiers Rating and Characteristic Curves (KBU600 - KBU610) COMCHIP www.comchiptech.com M DS0306003A Page 3