Silicon Bridge Rectifiers
MP1000-G THRU MP1010-G (RoHS Device)
Reverse Voltage: 50 ~ 1000 Volts Forward Current: 10 Amp Features:
Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-0
MP-10
H J G
+ ~
A E
~ -
Mechanical Data:
Case: Molded Plastic Terminals: Plated Leads Solderable Per MIL STD-202, Method 208 Weight: 5.4 grams (approx.) Mounting position: Through Hole for #6 Screw
D
E
Dim A B C D E
C B Metal Heat Sink
KBP Min. Max 14.73 15.75 5.80 6.90 19.00 1.00 O Typical 6.14 5.11 Hole for #6 screw G 3.60 4.00 J 10.30 11.30 2.38x45ºC Typical I All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate currently by 20%. Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note1) @ TA = 50ºC
MP MP MP MP KBP KBP KBP Symbol 1000-G 1001-G 1002-G 1004-G 1006-G 1008-G 1010-G UNIT
VRRM VRWM VR VR(RMS) Io
35 70 140 280 10 420 560 700 V A 50 100 200 400 600 800 1000 V
Non-Repetitive Peak Forward Surge Current 8.3ms Single IFSM Half-sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) @ IF=2.0A Peak Reverse Current @ TA=25ºC At Rated DC Blocking Voltage @ TA=100ºC Rating for Fusing (t1ms and
很抱歉,暂时无法提供与“MP1010-G”相匹配的价格&库存,您可以联系我们找货
免费人工找货