P4KE380C-G

400W Transient Voltage Suppressor P4KE-G Series Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 400 Watts RoHS Device Features DO-41 -Glass passivated chip -Low leakage -Uni and Bidirection unit -Excellent clamping capability -The plastic material has UL recognition 94V-0 -Fast response time: typically less than 1.0pS from 0 volts to BV min 0.033(0.84) DIA. 0.028(0.71) 1.000(25.40) MIN. 0.205(5.21) 0.165(4.19) Mechanical Data 0.117(2.97) DIA. 0.090(2.29) 1.000(25.40) MIN. -Case: Molded plastic DO-41 -Polarity: By cathode band denotes unidirectional device none cathode band denoted bi-directional device -Weight: 0.34 grams Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Unit Peak power dissipation a 10/1000μs waveform (Note 1) PPP 400 W Peak pulse current with a 10/1000μs waveform (Note 1) IPP See Next Table A PD 1.0 W Peak forward surge current, 8.3mS single half sine-wave unidirectional only(Note 2) IFSM 40 A Maximum instantaneous forward voltage at 25A for unidirectional only (Note 3) VF 3.5/5.0 V TJ, TSTG -55 to +150 Parameter O Power dissipation on infinite heatsink at TL=75 C Operating junction and storage temperature range O C NTOES: (1) Non-repetitive current pulse, per fig.5 and derated above TA=25 OC per fig. 1. (2) Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. (3) VF