P6KE300

600w Transient Voltage Suppressor COMCHIP www.comchiptech.com P 6KE Series Features - plastic package has underwriters laboratory flammability classification 94v-0 - 600w surge capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time:typically less than 1.0 ps from 0 volts to bv min - High temperature soldering guaranteed:260 ./10s /.375.(9.5mm) lead length/5lbs., (2.3kg) tension - T ypical TR l ess than 1µa above 10V DO15 1.0 (25.4) MIN .034(0.9) .028(0.7) .300(7.6) .230(5.8) .140(3.6) .104(2.6) Mechanical Data - Case: Molded plastic - Terminals: Axial leads solderable per MIL-STD-202, Method 208 - Polarity :color band denoted cathode except - Weight: 0.014 oz., 0.4 g 1.0(25.4) MIN Didemsions in inches and (mm) Maximum Ratings and Electrical Characteristics RATINGS PEAK POWER DISSIPATION AT TA=25 oC, TP=1ms(NOTE 1) STEADY STATE POWER DISSIPATION AT TL=75 oC LEAD LENGTHS .375"(9.5mm) (NOTE 2) PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD (JEDEC METHOD) (NOTE 3) OPERATING AND STORAGE TEMPERATURE RANGE NOTE︰ @ TA = 25 oC unless otherwise specified SYMBOL P PK PD VALUE 600 5.0 UNITS WATTS WATTS IFSM TJ,TSTG 100 - 55 TO + 175 Amps oC 1. NON-REPETITIVE CURRENT PULSE, PER FIG.3 AND DERATED ABOVE TA=25 .PER FIG 2. 2. MOUNTED ON COPPER LEAT AREA OF 1.57 IN2 (40mm2) 3. 8.3ms SINGLE HALF SINE-WAVE, DUTY CYCLE=4 PULSES PER MINUTES MAXIMUM 4. FOR BIDIRECTIONAL USE C SUFFIX FOR 10% TOLERANCE, CA SUFFIX FOR 5% TOLERANCE MDS0312009A Page 1 600w Transient Voltage Suppressor 6 00w DEVICE BREAKDOWN VOLTAGE BBR(VOLTS) @IT (mA) MIN MAX 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100.0 95.50 110.0 105.0 COMCHIP www.comchiptech.com P6KE6.8(C) P6KE6.8(C)A P6KE7.5(C) P6KE7.5(C)A P6KE8.2(C) P6KE8.2(C)A P6KE9.1(C) P6KE9.1(C)A P6KE10(C) P6KE10(C)A P6KE11(C) P6KE11(C)A P6KE12(C) P6KE12(C)A P6KE13(C) P6KE13(C)A P6KE15(C) P6KE15(C)A P6KE16(C) P6KE16(C)A P6KE18(C) P6KE18(C)A P6KE20(C) P6KE20(C)A P6KE22(C) P6KE22(C)A P6KE24(C) P6KE24(C)A P6KE27(C) P6KE27(C)A P6KE30(C) P6KE30(C)A P6KE33(C) P6KE33(C)A P6KE36(C) P6KE36(C)A P6KE39(C) P6KE39(C)A P6KE43(C) P6KE43(C)A P6KE47(C) P6KE47(C)A P6KE51(C) P6KE51(C)A P6KE56(C) P6KE56(C)A P6KE62(C) P6KE62(C)A P6KE68(C) P6KE68(C)A P6KE75(C) P6KE75(C)A P6KE82(C) P6KE82(C)A P6KE91(C) P6KE91(C)A P6KE100(C) P6KE100(C)A MDS0312009A 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 WORKING PEAK REVERSE VOLTAGE VRWM(VOLTS) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 MAXIMUM REVERSE LEAKAGE AT VRWM IR(µA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 MAXIMUM REVERSE CURRENT IRSM (AMPS) 56 57 51 53 48 50 44 45 40 41 37 38 35 36 32 33 27 28 26 27 23 24 21 22 19 20 17 18 15 16 14 14.4 12.6 13.2 11.6 12.0 10.6 11.2 9.6 10.1 8.9 9.3 8.2 8.6 7.4 7.8 6.8 7.1 6.1 6.5 5.5 5.8 5.1 5.3 4.5 4.8 4.2 4.4 MAX MAXIMUM CLAMPING TEMPERATURE VOLTAGE COEFFICIENT VRWM OF VBR (VOLTS) (%C) 10.8 0.057 10.5 0.057 11.7 0.061 11.3 0.061 12.5 0.065 12.1 0.065 13.8 0.068 13.4 0.068 15.0 0.073 14.5 0.073 16.2 0.075 15.6 0.075 17.3 0.078 16.7 0.078 19.0 0.081 18.2 0.081 22.0 0.084 21.2 0.084 23.5 0.086 22.5 0.086 26.5 0.088 25.2 0.088 29.1 0.090 27.7 0.090 31.9 0.092 30.6 0.092 34.7 0.094 33.2 0.094 39.1 0.096 37.5 0.096 43.5 0.097 41.4 0.097 47.7 0.098 45.7 0.098 52.0 0.099 49.9 0.099 56.4 0.100 53.9 0.100 61.9 0.101 59.3 0.101 67.8 0.101 64.8 0.101 73.5 0.102 70.1 0.102 80.5 0.103 77.0 0.103 89.0 0.104 85.0 0.104 98.0 0.104 92.0 01.04 108.0 0.105 103.0 0.105 118.0 0.105 113.0 0.105 131.8 0.106 125.0 0.106 144.0. 0.106 137.0 0.106 Page 2 600w Transient Voltage Suppressor 6 00w BREAKDOWN VOLTAGE BBR(VOLTS) @IT (mA) MIN MAX 99.0 105.0 108.0 114.0 117.0 124.0 135.0 143.0 144.0 152.0 153.0 162.0 162.0 171.0 180.0 190.0 198.0 209.0 225.0 237.0 270.0 285.0 315.0 332.0 360.0 380.0 396.0 418.0 121.0 116.0 132.0 126.0 143.0 137.0 165.0 158.0 176.0 168.0 187.0 179.0 198.0 189.0 220.0 210.0 242.0 231.0 275.0 263.0 330.0 315.0 385.0 368.0 440.0 420.0 484.0 462.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 WORKING PEAK REVERSE VOLTAGE VRWM(VOLTS) 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 175.0 185.0 202.0 214.0 243.0 256.0 284.0 300.0 324.0 342.0 356.0 376.0 MAXIMUM REVERSE LEAKAGE AT VRWM IR(µA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 COMCHIP www.comchiptech.com DEVICE P6KE110(C) P6KE110(C)A P6KE120(C) P6KE120(C)A P6KE130(C) P6KE130(C)A P6KE150(C) P6KE150(C)A P6KE160(C) P6KE160(C)A P6KE170(C) P6KE170(C)A P6KE180(C) P6KE180(C)A P6KE200(C) P6KE200(C)A P6KE220(C) P6KE220(C)A P6KE250(C) P6KE250(C)A P6KE300(C) P6KE300(C)A P6KE350(C) P6KE350(C)A P6KE400(C) P6KE400(C)A P6KE440(C) P6KE440(C)A NOTES： MAXIMUM REVERSE CURRENT IRSM (AMPS) 3.8 4.0 3.5 3.6 3.2 3.3 2.8 2.9 2.6 2.7 2.5 2.6 2.3 2.4 2.1 2.2 1.75 1.83 1.67 1.75 1.4 1.45 1.2 1.25 1.05 1.1 0.95 1.00 MAX MAXIMUM CLAMPING TEMPERATURE VOLTAGE COEFFICIENT VRWM OF VRR (VOLTS) (%C) 0.107 158.0 0.107 152.0 0.107 173.0 0.107 165.0 0.107 187.0 0.107 179.0 0.108 215.0 0.108 207.0 0.108 230.0 0.108 219.0 0.108 244.0 0.108 234.0 0.108 258.0 0.108 246.0 0.108 287.0 0.108 274.0 0.108 344.0 0.108 328.0 0.110 360.0 0.110 344.0 0.110 430.0 0.110 414.0 0.110 504.0 0.110 482.0 0.110 574.0 0.110 548.0 0.113 630.0 0.113 600.0 1. VBR MEASURED AFTER IT APPLIED FOR 300 µS,IT=SQUARE WAVE PULSE OR EQUIVALENT 2. SURGE CURRENT WAVEFORM PER FIGURE 3 AND DERATED PER FIGUE 2. 3. VF=3.5V AT IF=50A (P6KE6.8 THRU P6KE91A) VF=5.0V AT IF=50A (P6KE100 THRU P6KE440A) ON 1/2 SQUARE OR EQUIVALENT SINE WAVE. PW=8.3ms, DUTY CYCLE=4 PULSES PER MINUTE MXIMUM 4. FOR BIPOLAR TYPES HAVING VRWM OF 10 VOLTS AND UNDER, THE IR LIMIT IS DOUBLED MDS0312009A Page 3 600w Transient Voltage Suppressor 6 00w FIG. 1 - PEAK PULSE POWER RATING CURVE 100 PPPM PEAK PULSE POWER, KW PEAK PUSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTGE, % NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25oC COMCHIP www.comchiptech.com FIG. 2 - PULSE DERATING CURVE 100 10 75 1.0 50 0.1 0.1us 1.0us 10us 100us 1.0ms td, PULSE WIDTH, sec. FIG.3 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT, % 25 10ms 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, oC ℃ 150 tr =10usec. PEAK VALUE IPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 6.000 TJ=25℃ f=1 MHZ Vsig=50mVp-p MEASURED at ZERO BIAS HALF VALUE Ipp 2 CJ., JUNCTION CPACITANCE, PF 50 10/1000uSec. WAVEFORM as DEFINED by R.E.A. 1.000 td 0 0 1.0 2.0 t, TIME, ms 3.0 4.0 PM(AV), STEADY STATE POWER DISSIPATION, WATTS FIG. 5 - STEADY STATE POWER DERATING CURVE 5.0 L=0.375”(9.5mm) LEAD LENGTHS 100 MEASURED at STAND-OFF VOLTAGE, VWM 3.75 2.5 1.25 0 0 25 50 75 100 1.6× 1.6× 0.040” (40× 40× 1mm.) COPPER HEAT SINKS 60HZ RESISTIVE OR INDUCTIVE LOAD 10 1 10 100 200 V(BR), BREAKDOWN OLTAGE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL 125 150 175 200 IFSM, PEAK FORWARD SURGE CURRENT AMPERES 200 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TL, LEAD TEMPERATURE, ℃ IO, INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES FIG. 7 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 1.000 100 10 1 0.1 0.01 0.001 0 100 200 300 400 440 450 MEASURED AT DEVICES STAND-OFF VOLTAGE,VWM 100 TA=25oC 10 1 10 NUMBER OF CYCLES AT 60HZ 100 V(BR), BREAKDOWN VOLTAGE, VOLTS MDS0312009A Page 4