RS201-G

Surface Mount Silicon Bridge Rectifiers RS201-G thru RS207-G REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes "-G" : RoHS Device RS-2 .709(19.0) .669(17.0) .078(2.0)*45 ° FEATURES ●- Surge overload rating -50 amperes peak - Ideal for printed circuit board .551(14.0) .512(13.0) - Reliable low cost construction utilizong molded plastic .610(15.5) .571(14.5) technique results in expensive product - Mounting position :Any .035(0.9)DIA .028(0.7)TYP. .750 MIN. (19.0) .160(4.1) .140(3.6) .276(7.0) .236(6.0) .148(3.75) .108(2.75) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL RS201 RS202 RS203 RS204 RS205 RS206 RS207 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375″（9.5mm) Lead Lengths @TA=40 ℃ I(AV) 2.0 A IFSM 50 A I2t 15.0 A2s VF 1.1 V Peak Forward Surge Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop Per Element at 2.0A Peak Maximum DC Reverse Current at Rated TJ=25℃ DC Blocking Voltage TJ=100℃ Typical Junction Capacitance Per Element (Note1) Operating Temperature Range Storage Temperature Range 10.0 μA 1.0 mA CJ 30 pF TJ -55 to +125 ℃ TSTG -55 to +150 ℃ IR Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. MDS0905006A Page 1 Surface Mount Silicon Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES RS201-G thru RS207-G FIG.2-MXIMUM NON-REPETITIVE SURGE CURRENT 2.0 50 PEAK FORWARD SURGE CURRENT, AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0 100 50 150 40 30 20 Pulse Wldth 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 10 0 1 2 INSTANTANEOUS FORWARD CURRENT,(A) INSTANTANCEOUS REVERSE CURRENT, MICRAMPERES T J=100℃ 1.0 0.1 T J=25℃ 80 100 100 1.0 0.1 T J=25°C PULSE WIDTH:300us 2% DUTY CYCLE 0.01 60 50 10 10 40 20 FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 10 NUMBER OFCYCLES AT 60Hz AMBIENT TEMPERATURE ,℃ 0 5 120 140 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 CAPACITANCE,(pF) 40 20 10 6.0 4.0 T J=25°C, f=1MHZ Vsig=50m p-p 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100 REVERSE VOLTAGE,VOLTS MDS0905006A Page 2