S1K-HF

SMD General Purpose Rectifiers S1A-HF Thru. S1M-HF Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free DO-214AC (SMA) Features - The plastic package carries Underwriters Laboratory Flammability Classification 94V-0. - For surface mounted applications. - Low reverse leakage. - Built-in strain relief, ideal for automated placement. - High forward surge current capability. - High temperature soldering guaranteed : 250°C/10 seconds at terminals. - Glass passivated chip junction. 0.067 (1.70) 0.049 (1.25) 0.187 (4.75) 0.154 (3.90) 0.103 (2.62) 0.075 (1.90) Mechanical data - Case: JEDEC SMA molded plastic body over passivated chip. - Terminals: Solder plated, solderable per MIL-STD-750, Method 2026. - Polarity: Color band denotes cathode end. - Mounting position: Any. Circuit diagram 0.111 (2.83) 0.094 (2.40) Cathode 1 0.008(0.20) max. 0.209 (5.30) 0.189 (4.80) 0.060 (1.52) 0.030 (0.76) Dimensions in inches and (millimeter) 2 Anode Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol S1A-HF Parameter Repetitive peak reverse voltage S1B-HF S1D-HF S1G-HF S1J-HF S1K-HF S1M-HF Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V RMS voltage VRMS 35 70 140 280 420 560 700 V Peak forwardsurge current: 8.3ms single half sine-wave superimposed on rated load IFSM 30.0 A Average forward current IF(AV) 1.0 A Forward voltage at 1.0A VF 1.1 V IR 5 μA RθJA 75 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C DC blocking voltage DC reverse current TJ=25°C DC blocking voltage Typical thermal resistance (Note 1) Operating temperature range Storage temperature range Notes: 1. P.C.B mounted with 0.2x0.2" (5.0x5.0mm) copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 1 SP-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Rating and Characteristic Curves (S1A-HF thru. S1M-HF) Fig.2 - Max. Non-Repetitive Peak Forward Surge Current Fig.1 - Forward Current Derating Curve 1.2 50 8.3ms single half sine-wave (JEDEC Method) 1.0 40 0.8 30 0.6 20 0.4 10 Single Phase Half Wave 60Hz Resisive or inductive Load 0.2 0 0 0 25 50 75 100 125 150 175 0 10 Ambient Temperature, (°C) 20 Fig.3 - Typical Instantaneous Forward Characteristics 100 Number of Cycles at 60Hz Fig.4 - Typical Reverse Characteristics 1000 10 100 TJ=100°C 1 10 1 TJ=25°C Pulse Width=300µs 1% Duty Cycle 0.1 0.01 0.6 TJ=25°C 0.1 0.01 0.8 1.0 1.2 1.4 1.5 Instantaneous Forward Voltage, (V) 0 30 60 90 120 150 Percent of Peak Reverse Voltage, (%) Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 2 SP-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Reel Taping Specification P0 d P1 T E Index hole F W B P C A D2 D D1 W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AC (SMA) SYMBOL A B C d D (mm) 2.80 ± 0.10 5.33 ± 0.10 2.36 ± 0.10 1.55 ± 0.10 330 ± 2.00 (inch) DO-214AC (SMA) D1 13.50 ± 2.00 0.110 ± 0.004 0.210 ± 0.004 0.093 ± 0.004 0.061 ± 0.004 12.992 ± 0.079 0.531 ± 0.079 SYMBOL E F P P0 P1 W (mm) 1.75 ± 0.10 5.50 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.10 (inch) D2 0.069 ± 0.004 0.217 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.004 W1 T 0.25 ± 0.10 0.010 ± 0.004 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 3 SP-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Marking Code Part Number Marking code S1A-HF GS1A S1B-HF GS1B S1D-HF GS1D S1G-HF GS1G S1J-HF GS1J S1K-HF GS1K S1M-HF GS1M C:Comchip Logo A:Package C A XXXX XXXX : Product Type Marking Code Cathode Mark Suggested PAD Layout DO-214AC (SMA) D SIZE (mm) (inch) A 4.00 0.157 B 2.50 0.100 C 1.80 0.071 D 6.50 0.256 E 1.50 0.060 A E C B Standard Packaging REEL PACK Case Type REEL Reel Size 5,000 13 ( pcs ) DO-214AC (SMA) (inch) Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 4 SP-JG001 Comchip Technology CO., LTD.