SC35VB160-G

Glass Passivated 3 Phase Bridge Rectifiers SC35VB160-G REVERSE VOLTAGE - 1600Volts FORWARD CURRENT - 35Amperes "-G" : RoHS Device FEATURES SCVB - Surge overload -350 amperes peak - Low forward voltage drop - Mounting position :Any .079(2.0) .047(1.2) - Weight: 37g 1.417 MAX (36.0) 1.181 MAX (30.0) .252(6.4) .213(5.4) .354(9.0) .315(8.0) .295(7.5) .256(6.5) R1.75 .555(14.1) .516(13.1) .492 (12.5) .516 (13.1) .374(9.5) .334(8.5) .374(9.5) .334(8.5) .146(3.7)*45° + ~ ~ ~ 1.417 MAX (36.0) .256(6.50) .244(6.20) .555(14.1) .516(13.1) .504 (12.8) - .035(0.9) .028(0.7) .295(7.5) .256(6.5) .504 (12.8) .138(3.5) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Resistive or inductive load 60Hz. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL SC35VB160 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 1600 V Maximum RMS Bridge Input Voltage VRMS 1120 V I(AV) 35 A IFSM 350 A 300 Dielectric Strength I2t Vdis 2000 A2S V Mounting Torque TOR 0.8 N.m VF 1.1 V IR 100 μA RθJC Max: 0.7 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Maximum Average Forward Rectified Output Current @ TC=55℃ Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Current Squared time (1ms＜t＜10ms) Maximum Forward Voltage Drop Per Element at 12.5A Peak Maximum Reverse Current at Rated DC Blocking Voltage Per Element @ TA=25℃ Tyical Thermal Resistance (Note1) Operating Temperature Range Storage Temperature Range NOTES: 1.Thermal Resistance Junction to case. MDS0905016A Page 1 Glass Passivated 3 Phase Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES SC35VB160-G FIG.1-MAXMUN FORWARD SURGE CURRENT FIG.2- DERATING CURVE OUTPUT RECTIFIED CURRENT 450 400 350 PULSE WIDTH 8.3ms SINGLE HALF-SINE -WAVE (JEDEC METHOD) 300 250 200 150 100 50 0 1 10 100 AVERAGE FORWARD OUTPUT CURRENT , AMPERES PEAK FORWARD SURGE CURRENT , AMPERES 500 50 40 WITH HEATSINK 30 20 10 0 CASE TEMPERATURE,°C NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT ,(A) 100 10 1.0 0.1 0.01 0.4 150 100 50 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE,VOLTS MDS0905016A 10 1.0 T J=25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE Page 2