SS115-HF

SMD Schottky Barrier Rectifiers SS14-HF Thru. SS120-HF Reverse Voltage: 40 to 200 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free DO-214AC (SMA) Features 0.063 (1.60) 0.051 (1.30) - Metal silicon junction, majority carrier conduction - For surface mounted applications - Low power loss, high efficiency - High forward surge current capability - For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications 0.106 (2.70) 0.090 (2.30) 0.177 (4.50) 0.157 (4.00) 0.087 (2.20) 0.075 (1.90) Mechanical data 0.012(0.30) TYP. 0.205 (5.20) 0.185 (4.70) 0.059 (1.50) 0.035 (0.90) - Case: SMA - Terminals: Solderable per MIL-STD-750, Method 2026 - Approx. Weight: 70mg / 0.0025oz Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20 % Symbols SS14 SS16 SS110 SS115 SS120 Units Maximum repetitive peak reverse voltage VRRM 40 60 100 150 200 V Maximum RMS voltage VRMS 28 42 70 105 140 V Maximum DC blocking voltage VDC 40 60 100 150 200 V Maximum average forward rectified current IF(AV) 1.0 A IFSM 25 A Parameter Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Max instantaneous forward voltage at 1 A Maximum DC reverse current Tj = 25°C at rated DC reverse voltage Tj =100°C Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range VF 0.55 IR Cj 0.70 0.85 0.90 0.3 0.2 0.1 10 5 2 110 80 90 RθJA V mA pF °C/W Tj -55 ~ +125 °C Tstg -55 ~ +150 °C Notes: 1. Measured at 1 MHz and applied reverse voltage of 4 V D.C 2. P.C.B. mounted with 2.0" X 2.0" (5 X 5 cm) copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. SP-JB015 REV:B Page 1 Comchip Technology CO., LTD. SMD Schottky Barrier Rectifiers Rating and Characteristic Curves (SS14-HF Thru. SS120-HF) Fig.2 - Typical Reverse Characteristics Average Forward Current (A) 1.5 1.0 0.5 Single phase half-wave 60 Hz resistive or inductive load 0.0 25 75 50 100 125 150 Instantaneous Reverse Current (μA) Fig.1 - Forward Current Derating Curve 10 4 T J =100 °C 10 3 T J =75 °C 10 2 40V 60V-200V 10 1 T J =25 °C 10 0 0 Case Temperature (°C) Fig.3 - Typical Forward Characteristic 40 80 100 500 20 10 1.0 40V 60V 100V 150V/200V 0.1 T J =25 °C 200 100 50 40V 20 60V-200V 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 Fig.5 - Maximum Non-Repetitive Peak Forward Surge Current 24 18 12 8.3 ms Single Half Sine Wave (JEDEC Method) 00 10 100 Transient Thermal Impedance (°C/W） 30 1 100 Fig.6 - Typical Transient Thermal Impedance 36 06 10 Reverse Voltage (V) Instantaneous Forward Voltage (V) Peak Forward Surge Current (A) 60 Fig.4 - Typical Junction Capacitance Junction Capacitance (pF) Instantaneous Forward Current (A) 20 Percent of Rated Peak Reverse Voltage（%） 100 10 1 0.01 Number of Cycles at 60Hz 0.1 1 10 100 t, Pulse Duration（sec） Company reserves the right to improve product design , functions and reliability without notice. SP-JB015 REV:B Page 2 Comchip Technology CO., LTD. SMD Schottky Barrier Rectifiers Reel Taping Specification d P0 P1 Index hole F B P T E W C A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AC (SMA) DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.70 ± 0.10 5.30 ± 0.10 2.66 ± 0.10 1.50 ± 0.10 330 ± 2.00 50.0 MIN. 13.50 ± 0.50 (inch) 0.106 ± 0.004 0.209 ± 0.004 0.105 ± 0.004 0.059 ± 0.004 12.99 ± 0.079 1.969 MIN. 0.531 ± 0.020 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 5.50 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 0.60 ± 0.10 12.0 ± 0.30 18.4 ± 1.00 (inch) 0.069 ± 0.004 0.217 ± 0.004 0.157± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.024± 0.004 0.472 ±0.012 0.724 ± 0.040 Company reserves the right to improve product design , functions and reliability without notice. SP-JB015 REV:B Page 3 Comchip Technology CO., LTD. SMD Schottky Barrier Rectifiers Marking Code Part Number Marking Code SS14-HF SS14 SS16-HF SS16 SS110-HF SS110 SS115-HF SS115 SS120-HF SS120 Cathode Band XXXXX Product type marking code xxxxx = Product type marking code Suggested PAD Layout DO-214AC (SMA) D SIZE (mm) (inch) A 4.00 0.157 B 2.50 0.100 C 1.80 0.071 D 6.50 0.256 E 1.50 0.060 A E C B Standard Packaging REEL PACK Case Type DO-214AC (SMA) REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. SP-JB015 REV:B Page 4 Comchip Technology CO., LTD.