TV15C101K

SMD Transient Voltage Suppressor COMCHIP www.comchip.com.tw TV15C5V0 Thru TV15C171 W orking Peak Reverse Voltage: 5.0 - 170 Volts Power Dissipation: 1500 Watts F eatures I deal for surface mount applications Easy pick and place Plastic package has Underwriters Lab. flammability classification 94V-0 Typical IR less than 1uA above 10V Fast reponse time: typically less 1nS for uni-direction, less than 5nS for bidirectiona, from 0 V to BV min. SMC/DO-214AB 0.124(3.15) 0.108(2.75) 0.280(7.11) 0.260(6.60) 0.245(6.22) 0.220(5.59) 0.012(0.31) 0.006(0.15) Mechanical data C ase: JEDEC DO-214AB molded plastic Terminals: solderable per MIL-STD-750, method 2026 Polarity: Cathode band denoted Mounting position: Any Approx. Weight:0.21 gram 0.103(2.62) 0.079(2.00) 0.050(1.27) 0.030(0.76) 0.008(0.20) 0.0203(0.10) 0.320(8.13) 0.305(7.75) Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characterics R ating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% C haracteristics Peak Power Dissipation on 10/1000uS Waveform (Note 1, Fig. 1) Peak Pulse Current of on 10/1000uS Waveform (Note 1, Fig. 3) Steady State Power Dissipation at T L =75 C (Note 2) Peak Forfard Surge Current, 8.3mS Single Half Sine-Wave Superimposed on Rated Load, Uni-Directional Only (Note 3) Maxinum Instantaneous Forward Voltage at 100A for Uni-Directional only (Note 3 & 4) Operation Junction Temperature Range Storage Temperature Range Symbol P PPM V alue 1 500 See Table 1 5.0 U nits W atts A Watts I PPM P M(AV) I FSM 200 A VF Tj T STG 3.5/5.0 -55 to +150 -55 to +150 Volts C C N ote: 1. Non-Repetitive Current Pulse, per Fig. 3 and Derated above TA=25 C, per Fig. 2. 2. Mounted on 8.0x8.0 mm . Copper Pads to Each Terminal. 3. Measured on 8.3 mS Single Half Sine-Wave or Equivalent Square Wave, Duty Cycle=4 Pulse per Minute Maximum. 4. VF=3.5V on TV15C5V0 thru TV15C900 Devices and VF=5.0V on TV15C101 thru TV15C171. MDS0211016A Page 1 SMD Transient Voltage Suppressor COMCHIP www.comchip.com.tw Rating and Characteristic Curves (TV15C5V0 Thru TV15C171) Fig. 1 - Reverse Characteristics 100 Peak Pulse Power, P PPM ( KW) Mounted on 8mmx8mm Copper Pads 140 Fig. 2 - Pulse Derating Curve Peak pulse Power (Ppp) or Current (Ipp) Derating in Percent (%) 120 100 80 60 40 20 0 Mounted on 5mmx5mm Copper pads 10 1.0 Non-Repetitive Pulse Waveform Shown in Fig. 3 T A =25 C 0.1 0.1 1.0 10 100 1000 10000 Pulse Width, td ( uS) 0 25 50 75 100 125 150 175 Ambient A mbient Temperature,T A ( C) Fig. 3 - Pulse Waveform 125 F ig. 4 - Typical Junction Capacitance for Uni-Directional Devices 10,000 U ni-Directional Bi-Directional Junction Capacitance, Cj (pF) Measure at Zero Bias tr =10uS Peak Pulse Current, I PPM ( % ) 100 P ulse Width (td) is Defined as the Point Where the peak Current Decay to 50% of Ipp 75 Peak Value I PPM H alf Value Ipp/2 1,000 50 10/1000 uS Waveform as Defined by R.E.A. 100 Measure at Standard-off Voltage, Vwm T j=25 C f=1.0MHz Vsig=50mVp-p 25 0 0 0 1 .0 2.0 3.0 4.0 5 .0 10 100 500 Time, t (mS) Breakdown Voltage,VBR ( Volts) F ig. 5 - Steady State Power Derating Curve 7 .0 Fig. 6 - Maxinum Non-Repetitive Peak Forward Surge Current (UniDirectional Only) Peak Forward Surge Current, I FSM ( A) 200 Steady State Power Dissipation, PM( AV ), Watts 6.0 5.0 4.0 3.0 2.0 1.0 0 60Hz Resistive or Inductive Load 100 50 Mounted on 8mmx8mm Copper pads 0 25 50 75 100 125 150 175 20 8.3mS Single Half Sine-Wave (JEDEC Method) Tj=Tjmax 10 1 10 Number of Cycle at 60Hz 100 Leadt Temperature,T L ( C) MDS0211016A Page 2 S MD Transient Voltage Suppressor SMD Table 1. Specification Part No. TV15C5V0K(B) TV15C5V0J(B) TV15C6V0K(B) TV15C6V0J(B) TV15C6V5K(B) TV15C6V5J(B) TV15C7V0K(B) TV15C7V0J(B) TV15C7V5K(B) TV15C7V5J(B) TV15C8V0K(B) TV15C8V0J(B) TV15C8V5K(B) TV15C8V5J(B) TV15C9V0K(B) TV15C9V0J(B) TV15C100K(B) TV15C100J(B) TV15C110K(B) TV15C110J(B) TV15C120K(B) TV15C120J(B) TV15C130K(B) TV15C130J(B) TV15C140K(B) TV15C140J(B) TV15C150K(B) TV15C150J(B) TV15C160K(B) TV15C160J(B) TV15C170K(B) TV15C170J(B) TV15C180K(B) TV15C180J(B) TV15C200K(B) TV15C200J(B) TV15C220K(B) TV15C220J(B) TV15C240K(B) TV15C240J(B) TV15C260K(B) TV15C260J(B) TV15C280K(B) TV15C280J(B) TV15C300K(B) TV15C300J(B) TV15C330K(B) TV15C330J(B) TV15C360K(B) TV15C360J(B) TV15C400K(B) TV15C400J(B) TV15C430K(B) TV15C430J(B) TV15C450K(B) TV15C450J(B) COMCHIP www.comchip.com.tw VRWM (V) 5.00 5.00 6.00 6.00 6.50 6.50 7.00 7.00 7.50 7.50 8.00 8.00 8.50 8.50 9.00 9.00 10.00 10.00 11.00 11.00 12.00 12.00 13.00 13.00 14.00 14.00 15.00 15.00 16.00 16.00 17.00 17.00 18.00 18.00 20.00 20.00 22.00 22.00 24.00 24.00 26.00 26.00 28.00 28.00 30.00 30.00 33.00 33.00 36.00 36.00 40.00 40.00 43.00 43.00 45.00 45.00 Absolute Maximum Rating ( Ta=25 C ) VBR Min VBR Max IT IFSM (V) (V) ( mA ) (A) @8.3mS 6.40 7.55 10 100 6.40 7.25 10 100 6.67 8.45 10 100 6.67 7.67 10 100 7.22 9.14 10 100 7.22 8.30 10 100 7.78 9.86 1 100 7.78 8.95 1 100 8.33 10.67 1 100 8.33 9.58 1 100 8.89 11.30 1 100 8.89 10.23 1 100 9.44 11.9 1 100 9.44 10.8 1 100 10.00 12.6 1 100 10.00 11.5 1 100 11.10 14.1 1 100 11.10 12.8 1 100 12.20 15.4 1 100 12.20 14.0 1 100 13.30 16.9 1 100 13.30 15.3 1 100 14.40 18.2 1 100 14.40 16.5 1 100 15.60 19.8 1 100 15.60 17.9 1 100 16.70 21.1 1 100 16.70 19.2 1 100 17.80 22.6 1 100 17.80 20.5 1 100 18.90 23.9 1 100 18.90 21.7 1 100 20.00 25.3 1 100 20.00 23.3 1 100 22.20 28.1 1 100 22.20 25.5 1 100 24.40 30.9 1 100 24.40 28.0 1 100 26.70 33.8 1 100 26.70 30.7 1 100 28.90 36.6 1 100 28.90 33.2 1 100 31.10 39.4 1 100 31.10 35.8 1 100 33.30 42.2 1 100 33.30 38.3 1 100 36.70 46.5 1 100 36.70 42.2 1 100 40.00 50.7 1 100 40.00 46.0 1 100 44.40 56.3 1 100 44.40 51.1 1 100 47.80 60.5 1 100 47.80 54.9 1 100 50.00 63.3 1 100 50.00 57.5 1 100 Electrical Characteristics ( Ta=25 C ) Max Vc IR @VRWM Marking Code (V) Ipp(A) ( uA ) UNI BI 9.6 156.2 800 GDD BDD 9.2 163.0 800 GDE BDE 11.4 131.6 800 GDF BDF 10.3 145.6 800 GDG BDG 12.3 122.0 500 GDH BDH 11.2 133.9 500 GDK BDK 13.3 112.8 200 GDL BDL 12.0 125.0 200 GDM BDM 14.3 104.9 100 GDN BDN 12.9 116.3 100 GDP BDP 15.0 100.0 50 GDQ BDQ 13.6 110.3 50 GDR BDR 15.9 94.3 10 GDS BDS 14.4 104.2 10 GDT BDT 16.9 88.7 5 GDU BDU 15.4 97.4 5 GDV BDV 18.8 79.8 5 GDW BDW 17.0 88.2 5 GDX BDX 20.1 74.6 5 GDY BDY 18.2 82.4 5 GDZ BDZ 22.0 68.2 5 GED BED 19.9 75.3 5 GEE BEE 23.8 63.0 5 GEF BEF 21.5 69.7 5 GEG BEG 25.8 58.1 5 GEH BEH 23.2 64.7 5 GEK BEK 26.9 55.8 5 GEL BEL 24.4 61.5 5 GEM BEM 28.8 52.1 5 GEN BEN 26.0 57.7 5 GEP BEP 30.5 49.2 5 GEQ BEQ 27.6 53.3 5 GER BER 32.2 46.6 5 GES BES 29.2 51.4 5 GET BET 35.8 41.9 5 GEU BEU 32.4 46.3 5 GEV BEV 39.4 38.1 5 GEW BEW 35.5 42.2 5 GEX BEX 43.0 34.9 5 GEY BEY 38.9 38.6 5 GEZ BEZ 46.6 32.2 5 GFD BFD 42.1 35.6 5 GFE BFE 50.0 30.0 5 GFF BFF 45.4 33.0 5 GFG BFG 53.5 28.0 5 GFH BFH 48.4 31.0 5 GFK BFK 59.0 25.2 5 GFL BFL 53.3 28.1 5 GFM BFM 64.3 23.3 5 GFN BFN 58.1 25.8 5 GFP BFP 71.4 21.0 5 GFQ BFQ 64.5 23.2 5 GFR BFR 76.7 19.6 5 GFS BFS 69.4 21.6 5 GFT BFT 80.3 18.7 5 GFU BFU 72.7 20.6 5 GFV BFV MDS0211016A Page 3 S MD Transient Voltage Suppressor SMD A b so l u t e M a x i m u m R a t i n g ( T a = 2 5 C ) COMCHIP www.comchip.com.tw E le c tr ic a l C h a ra c te r ist ic s ( Ta = 2 5 C ) P a rt N o . T V1 5 C 4 8 0 K ( B ) T V1 5 C 4 8 0 J ( B ) T V1 5 C 5 1 0 K ( B ) T V1 5 C 5 1 0 J ( B ) T V1 5 C 5 4 0 K ( B ) T V1 5 C 5 4 0 J ( B ) T V1 5 C 5 8 0 K ( B ) T V1 5 C 5 8 0 J ( B ) T V1 5 C 6 0 0 K ( B ) T V1 5 C 6 0 0 J ( B ) T V1 5 C 6 4 0 K ( B ) T V1 5 C 6 4 0 J ( B ) T V1 5 C 7 0 0 K ( B ) T V1 5 C 7 0 0 J ( B ) T V1 5 C 7 5 0 K ( B ) T V1 5 C 7 5 0 J ( B ) T V1 5 C 7 8 0 K ( B ) T V1 5 C 7 8 0 J ( B ) T V1 5 C 8 5 0 K ( B ) T V1 5 C 8 5 0 J ( B ) T V1 5 C 9 0 0 K ( B ) T V1 5 C 9 0 0 J ( B ) T V1 5 C 1 0 1 K ( B ) T V1 5 C 1 0 1 J ( B ) T V1 5 C 1 1 1 K ( B ) T V1 5 C 1 1 1 J ( B ) T V1 5 C 1 2 1 K ( B ) T V1 5 C 1 2 1 J ( B ) T V1 5 C 1 3 1 K ( B ) T V1 5 C 1 3 1 J ( B ) T V1 5 C 1 5 1 K ( B ) T V1 5 C 1 5 1 J ( B ) T V1 5 C 1 6 1 K ( B ) T V1 5 C 1 6 1 J ( B ) T V1 5 C 1 7 1 K ( B ) T V1 5 C 1 7 1 J ( B ) V RWM (V) 48.00 48.00 51.00 51.00 54.00 54.00 58.00 58.00 60.00 60.00 64.00 64.00 70.00 70.00 75.00 75.00 78.00 78.00 85.00 85.00 90.00 90.00 100.00 100.00 110.00 110.00 120.00 120.00 130.00 130.00 150.00 150.00 160.00 160.00 170.00 170.00 V BR Min V BR Max (V) 53.30 53.30 56.70 56.70 60.00 60.00 64.40 64.40 66.70 66.70 71.10 71.10 77.80 77.80 83.30 83.30 86.70 86.70 94.40 94.40 100.00 100.00 111.00 111.00 122.00 122.00 133.00 133.00 144.00 144.00 167.00 167.00 178.00 178.00 189.00 189.00 IT ( mA ) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 IF S M (A) @ 8.3 m S 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Max Vc (V) 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 125.0 113.0 134.0 121.0 139.0 126.0 151.0 137.0 160.0 146.0 179.0 162.0 196.0 177.0 214.0 193.0 231.0 209.0 268.0 243.0 287.0 259.0 304.0 275.0 IR @ V RWM ( uA ) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Marking Code (V) 67.5 61.3 71.8 65.2 76.0 69.0 81.6 74.1 84.5 76.7 90.1 81.8 98.6 89.5 105.7 95.8 109.8 99.7 119.2 108.2 126.5 115.5 141.0 128.0 154.5 140.5 169.0 153.0 182.5 165.5 211.5 192.5 226.0 205.0 239.5 217.5 I p p (A ) 17.5 19.4 16.5 18.2 15.6 17.2 14.6 16.0 14.0 15.5 13.2 14.6 12.0 13.3 11.2 12.4 10.8 11.4 9.9 10.4 9.4 10.3 8.4 9.3 7.7 8.4 7.0 7.9 6.5 7.2 5.6 6.2 5.2 5.8 4.9 5.5 UNI GFW GFX GFY GFZ GGD GGE GGF GGG GGH GGK GGL GGM GGN GGP GGQ GGR GGS GGT GGU GGV GGW GGX GGY GGZ GHD GHE GHF GHG GHH GHK GHL GHM GHN GHP GHQ GHR BI BFW BFX BFY BFZ BGD BGE BGF BGG BGH BGK BGL BGM BGN BGP BGQ BGR BGS BGT BGU BGV BGW BGX BGY BGZ BHD BHE BHF BHG BHH BHK BHL BHM BHN BHP BHQ BHR Note: 1) Suffix K denotes 10% tolerance devices, suffix J denotes 5% tolerance devices. 2) Suffix B after part number to specify bi-directional devices. 3) For bi-directional devices having VR of 10 volts and under, the IR limit is double. MDS0211016A Page 4