15-006243

F E D C B AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. A n1,12 (9x) (5:1) SEALING COMPOUND D 10,66 +- 0,4 0,3 D b 30,88 +- 0,3 0,15 0,12 16,81 +- 0,23 0,02 12,8 +- 0,3 0,15 POS. 1 POS. 6 5,64 +- 0,12 0,18 2,55 +- 0,25 0 25 +- 0,13 SEALING GASKET 8,23 +- 0,25 0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR b 10° C C 15-00624o CONEC ABC 4-40 UNC 9,4 4,6 SEE NOTE 13 SW4,8 4-40 UNC B B NOTES: RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER SOLDERING 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0; BLACK 6. SEALING GASKET: SILICONE 70 SHORE A; BLUE 7. RUBBER GASKET: TPE; BLACK 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY; PLATING (SEE PART-NO.): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 20 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 13. CONNECTOR IS PART MARKED: 15-00624o CONEC ABC (see note 9) scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date A title: name D-SUB MALE drawn 10.09.2014 Lehmenkühler appd. 26.01.2015 9pos. SOLDER CUP with closed 4-40 UNC thread Fischer norm dwg no: d-old 2xb Ä5817 15.09.15 M.H. a Original rev. description D date part no: name C DINA3 sh: 1 15K1A1533 R B 15-00624o (see note 9) A