15K1A265

F E D C B A b c NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 14. CONNECTOR IS PART MARKED: 15-00050o CONEC ABC (5:1) D D 12,23 + 0,4 - 0,3 0,4 11,5 + 0,3 - 8,6 + 0,4 - 0,3 c 3,6 + 0,25 -0 6 + 0,18 - 0,12 8,23 + 0,25 -0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR POS. 1 C 47,7 + 0,3 -0 33,32 + 0,13 - 0,12 25,14 + 0,23 - 0,02 c C POS. 10 POS. 19 21,1 + 0,3 -0 10° n0,6 `0,05 (26x) c SEALING COMPOUND B O-RING B 15-00050o CONEC ABC SEE NOTE 14 b 4,6 9,4 4-40 UNC 4-40 UNC c SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm scale: material: title: 2:1 (5:1) APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION see notes A A name NAME: TITLE: 09.09.08 15.09.08 Schmidt Fischer D-SUB MALE HD 26pos. SOLDER PIN STRAIGHT with rear spacer clip and hexlocking screw dwg no: Inventor 10 DINR COMPANY NAME: 5xc 3xb a Ä 3435 Ä 3129 Origin 23.09.09 26.09.08 HS HS d-old 15K1A265 part no: A3 sh: 1 (see note 9) b A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C 15-00050 o F E B F E D C B A D P.C.B. HOLE DRILLINGS 19,431 `0,05 2,286 `0,1 1,98 `0,1 D 1,143 `0,1 n3,1 `0,1 (2x) + 0,1 n0,9 - 0 (26x) C 33,32 + 0,13 - 0,12 1,98 `0,1 1 9,652 `0,1 7,008 `0,03 C RECOMMENDED PANEL CUT-OUT i 0,26 A b 28,8 `0,1 B B 11,4 `0,1 B n3,1 `0,05 (2x) ,4 ` R3 10° `1° i 0,26 B 3 0,1 33,32 `0,1 A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old scale: material: title: 5:1 see sheet 1 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A name NAME: TITLE: 09.09.08 15.09.08 Schmidt Fischer P.C.B. HOLE DRILLINGS PANEL CUT-OUT D-SUB Male 26pos HD Solder pin straight dwg no: Inventor 10 DINR COMPANY NAME: 1xb a Ä 3129 Origin 26.09.08 HS 15K1A265 part no: A3 sh: 2 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C see sheet 1 F E B