15K1A274

F E D C B A b NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 14. CONNECTOR IS PART MARKED: 15-00041o CONEC ABC (5:1) D 11,5 + 0,4 - 0,3 D 11,2 + 0,4 - 0,3 8,6 + 0,4 - 0,3 b 3,6 + 0,25 -0 0,12 6 + 0,18 - 8,23 + 0,25 -0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR C 39,4 + 0,3 -0 C b POS. 1 POS. 6 25 + 0,13 16,81 + 0,23 - 0,02 0,12 0,3 21,1 + 0 - 10° n0,6 `0,05 (9x) b B O-RING SEALING COMPOUND 15-00041o CONEC ABC B SEE NOTE 14 9,4 4,6 4-40 UNC 4-40 UNC b SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old scale: material: title: 2:1 (5:1) APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION see notes A A name NAME: TITLE: 17.10.08 21.10.08 Schmidt Fischer D-SUB MALE 9pos. SOLDER PIN STRAIGHT with rear spacer clip and hexlocking screw dwg no: Inventor 10 DINR COMPANY NAME: 5xb a Ä3435 Origin 21.09.09 HS 15K1A274 part no: A3 sh: 1 (see note 9) A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C 15-00041o F E B F E D C B A D D P.C.B. HOLE DRILLINGS 25 + 0,13 1,42 `0,1 2,84 `0,1 0,12 5,49 `0,1 n3,1 `0,1 (2x) 1 2,74 `0,1 + 0,1 n1 - 0 (9x) 1,37 `0,1 C 4,11 `0,1 C RECOMMENDED PANEL CUT-OUT 20,5 `0,1 i 0,26 A B n3,1 `0,05 (2x) 11,4 `0,1 B B R3 10° `1° i 0,26 B ,4 `0 ,13 25 `0,1 A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old R scale: material: title: 5:1 see sheet 1 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A name NAME: TITLE: 17.10.08 21.10.08 Schmidt Fischer P.C.B. HOLE DRILLINGS PANEL CUT-OUT Male 9pos. Solder pin straight dwg no: COMPANY NAME: Inventor 10 a Origin 15K1A274 part no: DINA3 sh: 2 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C see sheet 1 F E B