15K1A285

F E D C B A NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 10. WASHERS: COPPER ALLOY; 80µin NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 13. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 15. CONNECTOR IS PART MARKED: 15-00077o CONEC ABC c n0,6 `0,05 (9x) 4,74 `0,3 6,35 `0,3 D (5:1) D 13,05 + 0,4 - 0,3 13,5 + 0,4 - 0,3 0,4 10,75 + 0,3 - 10,21 + 0,4 - 0,3 c 0,17 6,13 + 0,08 - 3,6 + 0,25 -0 C 39,4 + 0,3 -0 25 + 0,12 - 0,13 16,46 + 0 - 0,25 c 8 + 0,23 C 0,02 21,1 + 0,3 -0 10° METAL BRACKET B PRESS FOR FIXING ON PCB 3,2 `0,2 SEALING COMPOUND B O-RING 15-00077o CONEC ABC PCB SNAP SEE NOTE 15 9,4 4,6 4-40 UNC 4-40 UNC c SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old scale: material: title: 2:1 (5:1) APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION see notes A A name NAME: TITLE: 17.10.08 23.10.08 Schmidt Fischer D-SUB FEMALE 90° 9pos. SOLDER PIN ANGLED with metal bracket, hexlocking screw and snap dwg no: Inventor 10 DINR COMPANY NAME: 4xc a Ä 3435 Origin 05.10.09 HS 15K1A285 part no: A3 sh: 1 (see note 8) A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C 15-00077o F E B F E D C B A P.C.B. HOLE DRILLINGS D D 25 + 0,12 - 0,13 5,49 `0,1 n3,1 `0,1 (2x) 2,74 `0,1 1 6,31 `0,1 b c 10,75 6,85 + 0,1 n1 - 0 (9x) b c P.C.B. EDGE C 2,84 `0,1 FRONTPANEL 1,37 `0,1 4,11 `0,1 C RECOMMENDED PANEL CUT-OUT i 0,26 A 20,5 `0,1 B B B n3,1 `0,05 (2x) 11,4 `0,1 ,4 ` R3 10° `1° i 0,26 B 0,1 3 25 `0,1 A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm scale: material: title: 5:1 see sheet 1 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A name NAME: TITLE: 17.10.08 23.10.08 Schmidt Fischer P.C.B. HOLE DRILLINGS PANEL CUT-OUT D-SUB Female 9pos. Solder pin angled 90° dwg no: Inventor 10 DINR COMPANY NAME: 2xc 2xb a Ä3435 Ä 3344 Origin 05.10.09 15.04.09 HS HS d-old 15K1A285 part no: A3 sh: 2 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C see sheet 1 F E B