15K1A309

F E D C B A b NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 13. CONNECTOR IS PART MARKED: 15-00048o CONEC ABC (5:1) D 11,93 + 0,4 - 0,3 D 0,4 11,5 + 0,3 - 0,4 8,6 + 0,3 - b 0,17 6,13 + 0,08 - 3,6 + 0,25 -0 8 + 0,02 - 0,23 78 + 0,3 -0 C b 63,5 `0,13 54,96 + 0 - 0,25 C 21,1 + 0,3 -0 10° n0,64 `0,05 (37x) b B SEALING COMPOUND O-RING 15-00048o CONEC ABC B SEE NOTE 13 9,4 4,6 4-40 UNC 4-40 UNC b SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION tolerance dim. in mm date drawn appd. norm d-old scale: material: title: 2:1 (5:1) APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION see notes A A name NAME: TITLE: 17.10.08 21.10.08 Petker Fischer D-SUB FEMALE 37pos. SOLDER PIN STRAIGHT with rear spacer clip and hexlocking screw dwg no: Inventor 10 DINR COMPANY NAME: 5xb a Ä3435 Origin 23.09.09 HS 15K1A309 part no: B A A3 sh: 1 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C 15-00048o (see note 8) F E F E D C B A P.C.B. HOLE DRILLINGS 63,5 `0,13 D 24,84 `0,1 22,1 `0,1 19,33 `0,1 16,56 `0,1 13,82 `0,1 11,05 `0,1 8,28 `0,1 1,42 `0,1 + 0,1 n1 - 0 (37x) D 2,77 `0,1 1 C 2,84 `0,1 5,54 `0,1 n3,1 `0,1 (2x) 1,4 `0,1 4,14 `0,1 6,91 `0,1 9,68 `0,1 12,42 `0,1 15,19 `0,1 17,96 `0,1 20,7 `0,1 23,47 `0,1 C B RECOMMENDED PANEL CUT-OUT i 0,26 A B 59,1 `0,1 B n3,1 `0,05 (2x) 10° `1° 11,4 `0,1 R3,4 `0, i 0,26 B 13 63,5 `0,1 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH A tolerance dim. in mm date drawn appd. norm d-old R APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: A DO NOT ALTER CAD DRAWING BY HAND scale: material: title: 3:1 see sheet 1 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION name NAME: TITLE: 17.10.08 21.10.08 Petker Fischer P.C.B. HOLE DRILLINGS PANEL CUT-OUT D-SUB Female 37pos. Solder pin straight dwg no: Inventor 10 DIN- COMPANY NAME: a Origin 15K1A309 part no: A3 sh: 2 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C see sheet 1 F E B