15K1A500

F E D C B A NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 10. WASHERS: COPPER ALLOY; 80µin NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. FIXING-PLATE: PBT GF UL 94 V-0; BLACK 13. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 16. CONNECTOR IS PART MARKED: 15-00224o CONEC ABC 0,4 14,28 + 0,3 - 3 `0,3 6,35 `0,3 (5:1) n0,65 `0,05 (15x) D D 11,74 + 0,4 - 0,3 9,2 + 0,4 - 0,3 0,17 6,13 + 0,08 - 3,6 + 0,25 -0 8 + 0,02 - 0,23 C C 39,4 + 0,3 -0 25 + 0,12 - 0,13 16,46 + 0 - 0,25 0,3 21,1 + 0 - 10° FIXING PLATE (glued) B METAL BRACKET PRESS FOR FIXING ON PCB 13,5 + 0,4 - 0,3 3,2 `0,2 SEALING COMPOUND B O-RING 15-00224o CONEC ABC PCB SNAP see note 16 9,4 4-40 UNC 10,75 + 0,4 - 0,3 4,6 4-40 UNC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH SW 4,8 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old R scale: material: title: 2:1 (5:1) APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION see notes A A name NAME: TITLE: 23.11.09 27.11.09 Schmidt Fischer D-SUB HD FEMALE 90° 15pos. SOLDER PIN ANGLED metal bracket, fixing plate, hexlocking screw, snap dwg no: Inventor 10 DIN- COMPANY NAME: a Origin 15K1A500 part no: B A A3 sh: 1 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C 15-00224o (see note 8) F E F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D 25 + 0,13 10,287 `0,05 2,286 `0,1 1,143 `0,1 n3,1 `0,1 (2x) 0,12 D 5,461 `0,1 1 7,039 `0,03 6,85 5,3 `0,1 10,75 + 0,1 n0,9 - 0 (15x) C P.C.B. EDGE 2,54 `0,1 2,54 `0,1 C FRONTPANEL RECOMMENDED PANEL CUT-OUT i 0,26 A 20,5 `0,1 B B B n3,1 `0,05 (2x) 10° `1° 11,4 `0,1 ,4 ` R3 0 ,1 i 0,26 B 25 `0,1 3 A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old R scale: material: title: 5:1 see sheet 1 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A name NAME: TITLE: 23.11.09 27.11.09 Schmidt Fischer P.C.B. HOLE DRILLINGS PANEL CUT-OUT D-SUB Female 15pos. HD Solder pin angled 90° dwg no: Inventor 10 DIN- COMPANY NAME: a Origin 15K1A500 part no: A3 sh: 2 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C see sheet 1 F E B