15K1A510

F E D C B A NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 11. WASHERS: COPPER ALLOY; 80µin NICKEL 12. HEXLOCKING SCREWS: STAINLESS STEEL 13. FIXING-PLATE: PBT GF UL 94 V-0; BLACK 14. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 15. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 17. CONNECTOR IS PART MARKED: 15-00221o CONEC ABC 3,14 `0,3 6,35 `0,3 n0,6 `0,05 (44x) D (5:1) D 14,28 + 0,4 - 0,3 11,74 + 0,4 - 0,3 0,4 9,2 + 0,3 0,25 3,6 + 0 - 5,99 + 0 - 0,3 8,23 + 0,25 -0 C C POS. 1 POS. 16 POS. 31 61,4 + 0,3 -0 47,04 `0,13 38,86 + 0,23 - 0,02 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 21,1 + 0,3 -0 10° B FIXING PLATE (glued) PRESS FOR FIXING ON PCB METAL BRACKET 3,2 `0,2 B O-RING 13,5 + 0,4 - 0,3 SEALING COMPOUND PCB SNAP 15-00221o CONEC ABC see note 17 9,4 10,75 + 0,4 - 0,3 4,6 4-40 UNC 4-40 UNC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH SW 4,8 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old R scale: material: title: 2:1 (5:1) APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION see notes A A name NAME: TITLE: 18.11.09 27.11.09 Schmidt Fischer D-SUB HD MALE 90° 44pos. SOLDER PIN ANGLED metal bracket, fixing plate, hexlocking screw, snap dwg no: Inventor 10 DIN- COMPANY NAME: a Origin 15K1A510 part no: B A A3 sh: 1 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C 15-00221o (see note 9) F E F E D C B A P.C.B. HOLE DRILLINGS D (P.C.B. TOP SIDE) 47,04 `0,13 33,147 `0,05 1,143 `0,1 1 n3,1 `0,1 (2x) D 2,286 `0,1 16,51 `0,1 7,01 `0,03 10,75 + 0,1 n0,9 - 0 (44x) P.C.B. EDGE 5,3 `0,1 C 2,54 `0,1 2,54 `0,1 C B A 6,85 FRONTPANEL RECOMMENDED PANEL CUT-OUT i 0,26 A 42,5 `0,1 B B n3,1 `0,05 (2x) 11,4 `0,1 ,4 ` R3 10° `1° i 0,26 B 3 0,1 47,04 `0,1 A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: DO NOT ALTER CAD DRAWING BY HAND tolerance dim. in mm date drawn appd. norm d-old R scale: material: title: 4:1 see sheet1 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A name NAME: TITLE: 18.11.09 27.11.09 Schmidt Fischer P.C.B HOLE DRILLINGS PANEL CUT-OUT D-SUB Male 44pos. HD Solder pin angled 90° dwg no: Inventor 10 DIN- COMPANY NAME: a Origin 15K1A510 part no: A3 sh: 2 A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL rev. description D date name C see sheet 1 F E B