164A11619X

6 5 4 3 2 3,7 +- 0,6 0,2 1 7,4 `0,3 (5:1) D D 39,22 +- 0,33 0,46 6,13 +- 0,17 0,08 0,8 12,6 +- 0,33 0,43 24,74 +- 0,05 0,2 9,4 `0,3 12,24 `0,3 33,32 +- 0,13 0,12 n0,6 `0,05 (15x) 10° 0,02 8 +- 0,23 6,5 10,7 `0,2 164o11619X CONEC ABC 4-40 UNC see note 7 C 15,4 n3,2 14,6 max. MOUNTING BRACKET C n4 33,32 +- 0,13 0,12 9,6 `0,1 6,86 `0,1 B B NOTES: n1 +- 0,1 0 (15x) 1 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2,84 `0,1 1,37 `0,1 10,2 `0,1 4,11 `0,1 2. INSULATORS: PBT GF UL 94 V-0; BLACK 3. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): 11,5 o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 2 for 20µin HARD GOLD over min. 50µin NICKEL 2,74 `0,1 o PLEASE ADD 3 for GOLD FLASH over NICKEL o PLEASE ADD 4 for 50µin HARD GOLD over min. 50µin NICKEL 5,49 `0,1 4 MOUNTING BRACKET: PB GF UL 94 V-0; BLACK 8,23 `0,1 5. THREADED LOCKS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL Directive 2002/95/EC RoHS compliant 5 7. CONNECTOR IS PART MARKED: 164o11619X CONEC ABC DO NOT ALTER CAD DRAWING BY HAND A 6 6. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB n3,1 `0,1 (2x) THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH P.C.B. HOLE DRILLINGS ( TOP SIDE ) scale: material: tolerance 2:1 (5:1) see notes dim. in mm date A title: name drawn 16.05.12 Schmidt D-SUB FEMALE 90° appd. 16.05.12 Fischer 15pos. SOLDER PIN ANGLED 0.370inch with threaded lock and mounting bracket dwg no: DIN- norm d-old 16K1A3065 R a Original rev. description 4 date part no: name 3 2 164 o11619X A3 sh: 1 (see note 3) 1