17-300420

6 5 4 3 2 1 n31.5 D D Bayonet Channel x 3 Protective cap Bayonet Locking Type Plastic Version Cable Fitting Plastic Duplex LC Clip 11 25.7 Cable Gland Metal Ferrule Duplex LC Connector Plug Housing Zinc Die-Cast 32.2 108 REF. Dust Cap Coupling Ring Bayonet Locking Type Zinc Die-Cast Crimp Barrel Tether C C 21 n31.5 n24.5 Interfacial Seal 9.51 Key Protrusion x 3 100.81 REF. Notes: 6 5 B Description Part Number Nickel Plated Die-Cast Duplex LC Single Mode Plug Kit + Plastic Plug Cover Assembly Nickel Plated Die-Cast Duplex LC Multi Mode Plug Kit + Plastic Plug Cover Assembly Nickel Plated Die-Cast Duplex LC APC Single Mode Plug Kit + Plastic Plug Cover Assembly Directive 2002/95/EC RoHS Compliant 4 DOT NOT ALTER CAD DRAWING BY HAND A 1. Material and Finish: - Coupler Ring: Zinc Die-Cast, Nickel Plated - Plug Housing: Zinc Die-Cast, Nickel Plated - Cable Gland: Brass, Nickel Plated - Cable Gland Rubber Ring: NBR, Color: Black - Cable Fitting: PA (Black), UL94 V-0 - Interfacial Seal: Silicone, Color: White - Protective Cap: Polyester (Black); UL94 V-0 - Tether: Polycarbonate (Black) Duplex LC Connector - Housing: PEI , UL94 V-0, Color: SM Blue/MM Beige/APC SM Green - Inner Sub Assembly: Zirconia, Metal and PTFE - Crimp Barrel: Brass, Nickel Plated - Ferrule: Brass, Nickel Plated - Dust Cap: PC, Color: White - Duplex LC Clip: PC, Color: Black - Operating Temperature: -40°C to +85°C 2. IP67 rated when covered or fully mated with the appropriate mating connector 3. Accepts 4.5mm to 8.0mm outside diameter fiber optic cable THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION B Customer: Name Tolerance Scale: Unless otherwise specified Title Approval Date 0 PLC 1 PLC 2 PLC 3 PLC ANGLES `0.30 `0.20 `0.10 `0.05 Autodesk Inventor `1~ 2011 Date Name Draw. Nov. 09 Vincent Ke Appd. Nov. 09 J. Chaudry R original 3 Changes Date IP67 Industrial Duplex LC Plug + Protective Cover Assembly Kit A Nickel Plated Zinc Die-Cast Version D-old Rev. Dim. in mm Material: See Notes Title: Norm a 17-300410 17-300420 17-300430 DIN Drawing No.: 17K1A303 A3 Part No.: SEE PART NUMBER TABLE Name 2 1 Sheet 1/1