241A20420X-S1

F E D C B A 9,65 +- 0,5 0,3 (5:1) 53,09 +- 0,33 0,43 D 14,19 `0,3 17,03 `0,3 D 47,04 `0,13 6 +- 00,31 12,6 +- 0,33 0,43 0,9 38,86 +- 0,23 0,02 n0,6 `0,05 (25x) 10° C 8,26 +- 0,22 0,03 2,55 REF. C 241A20420X-S1 CONEC ABC 4-40 UNC see note 12 NOTES: B B 1. RoHS COMPLIANT 2. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 260°C FOR 5 SEC. AND SOLDER PREHEAT 100°C FOR 30 SEC.) 3. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 4. INSULATORS: HIGH TEMPERATURE PLASTIC UL 94 V-0; BLACK 5. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over min. 50µin NICKEL CONTACT TAILS PRETINNED 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 8. CAPACITANCE: 2 x 1300pF`20% 9. DIELECTRIC WITHSTANDING VOLTAGE: 424 VDC 10. P.C.B. HOLE DRILLINGS ON SHEET 2 11. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 12. CONNECTOR IS PART MARKED: 241A20420X-S1 CONEC ABC scale: material: tolerance 2:1 (5:1) see notes dim. in mm date name drawn 14.09.10 Schmidt appd. 14.09.10 Fischer A title: D-SUB π FILTER MALE 90° 25pos., 0.590inch with threaded insert norm dwg no: d-old a Origin rev. description D date part no: name C Inventor 10 DINA3 sh: 1 24K1A1270 R B 241A20420X-S1 A 16,56 `0,1 13,82 `0,1 11,05 `0,1 8,28 `0,1 5,54 `0,1 n1 +- 0,1 0 (25x) 2,77 `0,1 P.C.B. EDGE 2,84 `0,1 15,09 `0,1 1 1,4 `0,1 4,14 `0,1 6,91 `0,1 9,68 `0,1 12,42 `0,1 15,19 `0,1 P.C.B. HOLE DRILLINGS DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH ( P.C.B. TOP SIDE ) scale: material: tolerance 2:1 see sheet 1 dim. in mm date drawn 14.09.10 Schmidt appd. Fischer 14.09.10 title: name P.C.B. HOLE DRILLINGS norm d-old R a Origin rev. description date name D-SUB π FILTER MALE 90° 25pos., 0.590inch with threaded insert dwg no: Inventor 10 DINA4 24K1A1270 sh: 2 part no: see sheet 1