3017W5SCT56N40X

F E D C B A 11 `0,3 (5:1) D 11,65 `0,3 D 3,2 `0,2 12,6 +- 0,33 0,43 63,5 `0,13 54,94 +- 0,02 0,23 6,13 +- 0,17 0,08 0,8 69,5 +- 0,2 0,56 8 +- 0,02 0,23 C C PCB-SNAP 10° Ø2,85 (5x) 6,35 `0,3 Ø0,6 `0,05 (12x) METAL BRACKET 7,19 `0,3 10,03 `0,3 SEE NOTE 10 11,3 `0,2 8,55 `0,2 4-40 UNC 3,3 +- 0,5 0,3 12,1 PRESS FOR FIXING ON PCB 3017W5SCT56N40X CONEC ABC B b B b SIGNAL CONTACTS NOTES: 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0, GREEN 3. SIGNAL CONTACTS: COPPER ALLOY PLATING: 30µin HARD GOLD over min. 50µin NICKEL 4. HIGH POWER CONTACTS 20A: COPPER ALLOY PLATING MATING AREA: 30µin HARD GOLD over min. 50µin NICKEL PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 7. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 8. P.C.B. HOLE DRILLINGS ON SHEET 2 9. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 10. CONNECTOR IS PART MARKED: 3017W5SCT56N40X CONEC ABC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date name drawn 05.04.04 Lehmenkühler appd. 05.04.04 Mickenbecker norm d-old 2xb Ä4212 a Original rev. description D A title: D-SUB COM. FEMALE 90° 17W5S with threaded insert, metal bracket and snap dwg no: DIN- 30.01.2012 K.H. date name part no: C A3 13K1A1090 R B sh: 1/2 3017W5SCT56N40X A F D E D C B A D P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 63,5 `0,13 11,05 `0,1 8,28 `0,1 5,54 `0,1 2,77 `0,1 Ø1 +- 0,1 0 (12x) A1 9,35 1 1,38 `0,1 7,99 `0,1 12,45 `0,1 P.C.B. EDGE n3,2 `0,1 (5x) C n3,1 `0,1 (2x) 4,14 `0,1 b 2,84 `0,1 C 6,91 `0,1 9,68 `0,1 15,7 `0,1 B 15,7 `0,1 A F E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 22,68 `0,1 B 22,68 `0,1 scale: material: tolerance 2:1 SEE SHEET 1 dim. in mm date name drawn 05.04.04 Lehmenkühler P.C.B. HOLE DRILLINGS appd. 05.04.04 Mickenbecker D-SUB COMBINATION 17W5S with threaded insert,metal bracket and snap dwg no: DIN- norm d-old 1xb Ä4212 a Original rev. description D A title: 30.01.2012 K.H. date name part no: C A3 13K1A1090 R B sh: SEE SHEET 1 A