43-01014

A Technical specification: M12x1 Rated voltage: IEC 61076-2-101 4pos 250 V 5pos 60 V Current rating: IEC 61076-2-101 4/5pos 4 A at 40°C Insulation resistance: IEC 60512 >=100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: -30°C ... +80° Mating cycles: IEC 60512-9a >=100 8pos 30 V 8pos 2 A at 40°C Ω 21,5 19 Width across flats 19 L Sealing Materials: M16x1,5 A A 45° 45° 2 2 1 3 1 4 8 5 7 6 3 Contact: CuZn Contact plating: Nickel, gold plated Contact carrier: PBT GF, UL 94 Sealing chassis: NBR Counternut: CuZn, nickel plated Socket housing: CuZn, nickel plated Grouting: Polyurethane-resin, UL 94 Installation specification: 1 2 3 4 5 brown 2 blue 3 black Conec installation tool: Torque wrench: 36-000200 Insert across flats 19: 36-000250 Contact assignment: 1 white 1-1,2 Nm 4 white brown green yellow 5 6 7 8 +0,1 Contact assignment: Recommended torque: grey 13,5 4 5 pink blue n16,1 +0,1 red Minimum wall thickness 1,5mm, alternativ panel cut-out d=16,1 green-yellow Part no: Description: Pos Length L: Wire: 43-01012 SAL - 12 - FSH4 - 0,5 4 0,5m 43-xxxxx SAL - 12 - FSH4 - ... 4 x 43-01013 SAL - 12 - FSH5 - 0,5 5 0,5m 43-xxxxx SAL - 12 - FSH5 - ... 5 x 43-01014 SAL - 12 - FSH8 - 0,5 8 0,5m 43-xxxxx SAL - 12 - FSH8 - ... 8 x Directive 2002/95/EC RoHS compliant DO NOT ALTER CAD DRAWING BY HAND AWG 24 PVC, UL Index: c 23.11.12 MG Ä4555 Data sheet revised, technical specification changed, materials corrected date tolerance of wire: L 0,5m: L + 4% general tolerance: 0 0,0 0,00 ± 0,50mm ± 0,25mm ± 0,10mm THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH title: dim. in mm drawn 01.03.07 appd. 01.03.07 Male socket M12x1 with wires, backmounting name Fromm dwg no: Mankopf 43K1A215 R part no: see table