43-01026

A Technical specification: M12x1 Rated voltage: IEC 61076-2-101 4pos 250 V 5pos 60 V Current rating: IEC 61076-2-101 4/5pos 4 A at 40°C Insulation resistance: IEC 60512 >=100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: -40°C ... +85°C Mating cycles: IEC 60512-9a >=100 8pos 30 V 8pos 2 A at 40°C Ω L Sealing 20,5 18 Width across flats 19 n0,8 D2 Materials: D1 M16x1,5 A A 6 5 3 8 4 1 3 1 2 CuZn Contact plating: Nickel, gold plated Contact carrier: PBT GF, UL 94 Sealing connector: chassis: FPM NBR Counternut: CuZn, nickel plated Socket housing: CuZn, nickel plated Grouting: Polyurethane-resin, UL 94 Installation specification: Recommended torque: 1-1,2 Nm Conec installation tool: Torque wrench: 36-000200 Insert across flats 19: 36-000250 n1,2 45° 33 ° 45° 2 7 5 45° 4 Contact: 6x49° Pin layout PCB 13,5 +0,1 n5,5 n 16,1 +0,1 Directive 2002/95/EC RoHS compliant DO NOT ALTER CAD DRAWING BY HAND Minimum wall thickness 1,5mm, alternativ panel cut-out d=16,1 Index: c 23.11.12 MG Ä4555 Data sheet revised, technical specification changed, materials corrected date appd. general tolerance: ± 0,50mm ± 0,25mm ± 0,10mm THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH Description: 43-01026 SAL - 12 - FKH4 - P5,5 4 43-01027 SAL - 12 - FKH5 - P5,5 5 43-01028 SAL - 12 - FKH8 - P5,5 8 43-01029 SAL - 12 - FKH4 - P12 4 43-01030 SAL - 12 - FKH5 - P12 5 43-01031 SAL - 12 - FKH8 - P12 8 01.03.07 Pos Length L: D1 n5,0 n1,6 n5,5 n1,4 n5,0 n1,6 12mm n5,5 n1,4 Female Socket M12x1 with dip solder, backmounting name Fromm dwg no: Mankopf 43K1A231 R part no: D2 5,5mm title: dim. in mm drawn 20.02.07 0 0,0 0,00 Part no: see table