43-01033

Technical specification: A M12x1 4pos 250 V 3 L 21,5 19 Sealing Current rating: IEC 61076-2-101 4/5pos 4 A at 40°C Insulation resistance: IEC 60512 >=100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: -40°C ... +85°C Mating cycles: IEC 60512-9a >=100 D2 Contact: CuZn Contact plating: Nickel, gold plated Contact carrier: PBT GF, UL 94 Sealing chassis: NBR Counternut: CuZn, nickel plated Socket housing: CuZn, nickel plated Grouting: Polyurethane-resin, UL 94 A A 4 5 1 3 6 7 8 1 4 Installation specification: Recommended torque: 1-1,2 Nm 3 Conec installation tool: Torque wrench: 36-000200 Insert across flats 19: 36-000250 2 45° 45° 2 5 45° 6x49° Pin layout PCB 33 ° n1,2 13,5 +0,1 n5,5 n 16,1 Index: c 23.11.12 MG Ä4555 Data sheet revised, technical specification changed, materials corrected date appd. ± 0,50mm ± 0,25mm ± 0,10mm THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH Description: 43-01032 SAL - 12 - FSH4 - P5,5 4 43-01033 SAL - 12 - FSH5 - P5,5 5 43-01034 SAL - 12 - FSH8 - P5,5 8 43-01035 SAL - 12 - FSH4 - P12 4 43-01036 SAL - 12 - FSH5 - P12 5 43-01037 SAL - 12 - FSH8 - P12 8 Pos Length L: 01.03.07 D1 D2 n5,0 n1,6 5,5mm n5,5 n1,4 n5,0 n1,6 12mm n5,5 n1,4 title: dim. in mm drawn 01.03.07 0 0,0 0,00 Part no: +0,1 Minimum wall thickness 1,5mm, alternativ panel cut-out d=16,1 Directive 2002/95/EC RoHS compliant 8pos 2 A at 40°C Materials: M16x1,5 DO NOT ALTER CAD DRAWING BY HAND 8pos 30 V n0,8 D1 general tolerance: 5pos 60 V Ω Width across flats 19 Rated voltage: IEC 61076-2-101 Male socket M12x1 with dip solder, backmounting name Fromm dwg no: Mankopf 43K1A268 R part no: see table