6STD15PCR99E10X

F E D C B A NOTES: b b 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240°C FOR 5 SEC. AND SOLDER PREHEAT 120°C FOR 120 SEC.) (5:1) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK 3,6 +- 0,25 0 o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL D o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) 5. THREADED SPACER CLIPS: COPPER ALLOY; SEALING COMPOUND 8 `0,3 4. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): D min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 5,7 +- 0,12 0,18 8. O-RING: SILICON; BLUE 9. SEALING COMPOUND: PUR; BLUE 10. RUBBER GASKET: TPE; BLACK 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) 8,26 +- 0,22 0,03 / max.40Ncm (3.5 in.LB) 14. CONNECTOR IS PART MARKED: 6STD15PoR99E10X CONEC ABC (see note 4) RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 47,7 +- 0,3 0 C 33,3 +- 0,15 0,1 b C 21,1 +- 0,3 0 25,17 +- 0,2 0,05 10° n0,6 `0,05 (15x) b 6STD15PoR99E10X CONEC ABC O-RING M3 7,9 `0,3 B 5 `0,25 B SEE NOTE 7 SEE NOTE 14 M3 SW 4,75 Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date drawn 30.06.08 Lehmenkühle D-SUB MALE appd. Mickenbecker 15pos. SOLDER PIN STRAIGHT threaded spacer clip and hexlocking screw dwg no: DIN- 30.06.08 norm d-old 5xb Ä4394 a Original rev. description D A title: name 19.07.2012 K.H. 15K1A244 R date A3 sh:1/2 b part no: 6STD15P o R99E10X (see note 4) name C B A F E D C B A P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 9,6 `0,1 6,86 `0,1 D D 4,11 `0,1 1,37 `0,1 n1 +- 0,1 0 (15x) n3,1 `0,1 (2x) 2,84 `0,1 1 2,74 `0,1 5,49 `0,1 C C 8,23 `0,1 33,3 +- 0,15 0,1 b RECOMMENDED PANEL CUT-OUT 28,8 `0,1 i 0,26 A 11,4 `0,1 B 10°`1° E DO NOT ALTER CAD DRAWING BY HAND 33,3 `0,1 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH F ,13 A B i 0,26 B 4 `0 R 3, n3,1 `0,05 (2x) B A scale: material: tolerance 3:1 SEE SHEET 1 dim. in mm date drawn 30.06.08 Lehmenkühler P.C.B. HOLE DRILLINGS appd. Mickenbecker RECOMMENDED PANEL CUT-OUT D-SUB MALE 15pos. dwg no: DINA3 15K1A244 sh:2/2 30.06.12 norm d-old 1xb Ä4394 a Original rev. description D 19.07.12 K.H. R date A title: name part no: name C B SEE SHEET 1 A