CFM21WA4P5-0394

F E D C B 3,4 +- 0,5 0,3 A 7,5 `0,3 (5:1) 9,4 `0,3 D 3,2 `0,2 0,9 12,24 `0,3 D 6 - 0,31 69,39 +- 0,31 0,45 +0 12,6 +- 0,33 0,43 63,5 `0,13 55,3 +- 0,25 0 8,26 +- 0,22 0,03 C C PCB SNAP n1,9 (4x) 10° n0,6 `0,05 (17x) 8,33 +- 0,32 0,28 10,5 `0,3 14 `0,2 14,9 METAL BRACKET PRESS FOR FIXING ON PCB B 10,7 `0,2 CFM21WA4P5-0394 CONEC ABC 4-40 UNC SEE NOTE 10 B NOTES: A F E DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 1. METALSHELLS: STEEL; YELLOW CHROMATE 2. INSULATORS: PBT GF UL 94 V-0, GREEN 3. SIGNAL CONTACTS: COPPER ALLOY PLATING: 30µin HARD GOLD over min. 50µin NICKEL 4. HIGH POWER CONTACTS 15A: COPPER ALLOY PLATING MATING AREA: 30µin HARD GOLD over min. 50µin NICKEL PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. METAL BRACKET: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 7. PCB-SNAP: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 8. P.C.B. HOLE DRILLINGS ON SHEET 2 9. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB 10. CONNECTOR IS PART MARKED: CFM21WA4P5-0394 CONEC ABC scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date A title: name drawn 02.04.13 Schmidt D-SUB COMBINATION MALE 90° appd. 02.04.13 Koch 21WA4P with threaded insert,metal bracket and snap dwg no: DIN- norm d-old Original rev. description D date part no: name C A3 sh: 1 13K1A4277 R a B CFM21WA4P5-0394 A F E D C B A D D 63,5 `0,13 22,68 `0,1 11,05 `0,1 15,7 `0,1 8,28 `0,1 5,54 `0,1 2,77 `0,1 n1 +- 0,1 0 (17x) n3,1 `0,1 (2x) 1 C C P.C.B. EDGE 2,84 `0,1 n2,3 `0,1 (4x) 10,3 `0,1 9,23 `0,1 11,6 A1 1,38 `0,1 4,14 `0,1 6,91 `0,1 9,68 `0,1 P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) A F E DO NOT ALTER CAD DRAWING BY HAND B THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH B scale: material: tolerance 3:1 SEE SHEET 1 dim. in mm date A title: name drawn 02.04.13 Schmidt P.C.B. HOLE DRILLINGS appd. 02.04.13 Koch D-SUB COMBINATION MALE 90° 21WA4P with threaded insert,metal bracket and snap dwg no: DIN- norm d-old Original rev. description D date part no: name C A3 sh: 2 13K1A4277 R a B SEE SHEET 1 A