CPH38W23MARARK9X

H G F E D C B A 12,7 max. 91,2 max. n1,6 n0,65 n1,6 F 42,5 `0,05 37,25 `0,05 2,6 42,5 `0,05 F 33 `0,05 28,75 `0,05 24,5 `0,05 85 Second Mate First Mate Pos. 22, 25, 28 Last Mate Signal 37,5 `0,05 32,5 `0,05 27,5 `0,05 +0 - 0 ,1 20,25 `0,05 16 `0,05 ) ep de 13,8 E 11,75 `0,05 x) (2x ) E 17,6 2,125 `0,05 n 3,25 `0,05 1 `0,05 1 7,8 10,085 2,125 `0,05 2,125 `0,05 D (23 x) 4,25 `0,05 6,25 `0,05 8,25 `0,05 10,25 `0,05 12,25 `0,05 14,25 `0,05 16,25 `0,05 2,125 `0,05 10,085 `0,05 2,5 `0,05 2,5 `0,05 Marking on opposite side (see note 5) n1 ,14 `0 ,1 ( 15 6 2, n3 ( ,5 3 9, 7,5 `0,05 D 5 8 7 4 1 n2 ,03 `0 ,1 C 3 6 9 2 10 18,25 `0,05 20,25 `0,05 22,25 `0,05 C NOTES: 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 - CONTACTS: COPPER ALLOY, PLATING: FLASH GOLD OVER NICKEL 2. ELECTRICAL CHARACTERISTICS: CREEPING AND CLEARANCE DISTANCE; MINIMUM: - CONTACT 38 TO CONTACT 37: 2,5 MM - CONTACT 38 TO CONTACT 36: 3,2 MM B PCB hole pattern b - CONTACT 37 TO CONTACT 36: 3,2 MM - CONTACT 38 TO SIGNAL CONTACTS: 6,4 MM - CONTACT 37 TO SIGNAL CONTACTS: 6,4 MM - CONTACT 36 TO SIGNAL CONTACTS: 2,0 MM CONTACT CURRENT RATING: - POWER CONTACTS POS. 36-38: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 5 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0007 OHM MAX. - SIGNAL CONTACTS: 0,004 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 3. WORKING TEMPERATURE: -55°C TO +125°C 1 3 5 5 2 2 10 1 10 1 quantity THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND Fixing plate Signal contact type 4 (Pos. 22,25,28) Signal contact type 3 (Pos. 23,26,29,32,35) Signal contact type 2 (Pos. 21,24,27,30,33) Signal contact type 1 (Pos. 31,34) Power contact type 4 (Pos. 36,38) Power contact type 3 (Pos. 2,4,6,8,10,12,14,16,18,20) Power contact type 2 (Pos. 37) Power contact type 1 (Pos. 1,3,5,7,9,11,13,15,17,19) Case 38pos. male angled inverted part description partlist finish: tolerance see notes ISO 2768-m date drawn 12.01.05 appd. norm d-old 10 9 8 7 6 5 4 3 2 1 item B dwg no. / norm material 2:1 see notes dim. in mm name scale: material: title: Mankopf PLUG CONNECTOR 38pos. SOLDER PIN ANGLED, INVERTED CompactPCI A 12.01.05 E. Mickenbecker A 4. ORDER OF CONTACT MATING: 1. MATE: POS. 36 / 2. MATE: POS. 37, 38 / LAST MATE: POS. 22, 25, 28 5. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC dwg no: R Inventor 1x b Ä 2168 21.02.05 Mkf. 45K1A004 part no: A DINA2 sh: 1 rev. description date name B CPH38W23MARARK9X H G F E D C