CS-023E-114.285M

CS-023E 3.2x2.5mm Crystal Resonator 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Description: Features: The Connor-Winfield CS-023E is a 3.2x2.5mm surface mount AT-cut 3rd Overtone crystal. The CS-023E is used as the reference crystal in many frequency synthesizer and PLL applications. • Frequency: 114.285 MHz • Frequency Calibration: : +/-20 ppm • Frequency Stability: +/-20 ppm • Temperature Range: -40 to 85°C • Surface Mount Package • Tape and Reel Packaging • RoHS Compliant / Lead Free Electrical Specifications Parameter Minimum Nominal Output Frequency (Fo) - 114.285 Frequency Calibration (@25°C) -20 - Frequency Stability vs. Change in Temperature -20 - Operating Temperature Range: -40 - Operation Mode 3rd Overtone Cut AT Cut Aging -3 - Shunt Capacitance: (Co) - - Load Capacitance: (CL) - 18 Equivalent Series Resistance @ 25 °C - - Drive Level - 100 Insulation Resistance - 500 Storage Temperature: -55 - Maximum Units 20 85 ppm °C 3 2.5 - 50 200 - 125 ppm/Year pF pF Ohms uW Mohm °C - 20 MHz ppm Notes @ 100 Vdc Package Characteristics Package Leakage Hermetically sealed ceramic 3.2x2.5mm SMD Package. 0.01ppm atm, cc/sec. maxamum Ordering Information CS-023E-114.285M Package Outline 0.125 (3.2mm) Part Number 0.098 Pad 1 (2.5mm) Indicator GND 4 Frequency 1 Bulletin Page Revision Date 0.055 (1.4mm) 2 2 GND Top View Suggested Pad Layout 0.031 Max. (0.8mm Max.) 1 3 Date Code CS23E 3B * 114M 0.047 (1.2mm) Pad Connections 0.031 (0.8mm) 0.055 (1.4mm) 0.020 4 (0.50mm) 3 0.047 (1.2mm) 1 2 0.047 (1.2mm) 0.027 (0.7mm) Xt361 1 of 3 03 24 July 2019 4 3 Bottom View Dimensional Tolerance: ±.005 (.127mm) Top View 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Tape and Reel Information Date Code Information 2 Character Date Code Year Code 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 = 2019 0 = 2020 1 = 2021 2 = 2022 2000 PCS/REEL MAXIMUM Mo nth Code A = January B = February C = March D = April E = May F = June G = July H = August J = September K = October M = November N = December Date Code Example: 9G 9 = 2019, G = July Marking Information Solder Profile XP-152 Temperature G Deck 260°C 260°C 220°C 180°C Part Number Pad 1 Indicator CS23E 3B * 114M Date (Year Month) Code Output Frequency 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications. Xt361 2 of 3 03 24 July 2019 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com DLD Testing Information 100% of the crystals are measured at the following drive levels in the order listed: 10nw 25nw 50nw 100nw 500nw 1uw 5uw 10uw 50uw 100uw The reference value is the ESR and FL at 50uw The Frequency and resistance measurements are then compared to the reference value and P/F limits are as follows: 10/25/50 nw levels 2.0 ppm max, 10% ESR max Remaining drive levels 1.0 ppm max, 10% ESR max. All devices are tested once and no retesting allowed. CS-023E is tested -40 to 85 °C every 2°C with no discontinuities > 1 ppm and the change in R - effective < 10% Revision History Revision 00 01 02 03 Date 02/11/13 04/02/14 10/05/16 07/24/19 Changes New Issue Revision to Shunt Capacitance Update to Description, Drive Level and Date Code Information Updated tape and reel information and date code table. Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications. Xt361 3 of 3 03 24 July 2019