DOC102V-019.44M

Available at Digi-Key** www.digikey.com Surface Mount Oven Stabilized Oscillator DOC Series OCXO / VCOCXO Description: Features: Connor-Winfield’s high stability DOC series are exceptionally precise frequency 8 standards, excellent for use 102 F 050 DOC .0 MHz in cellular base stations, test 10 equipment, Synchronous Ethernet and VSAT applications. These true surface mount OCXO / VCOCXO oscillators provide frequency stabilities in the range of ±20 ppb to ±250ppb, over the commercial, extended commercial or the industrial temperature range. The DOC series is available with a CMOS output and a Voltage Controlled Option. These oscillators provide outstanding phase noise characteristics that will meet the most stringent requirements. 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com • OCXO - Fixed Frequency VCOCXO - Voltage Controlled Option • 3.3 Vdc Operation • SMT Package • Frequency Stabilities Available: ±20ppb, ±50ppb, ±100ppb, ±140ppb, ±250ppb • Temperature Ranges Available: 0 to 70°C, -20 to 75°, -40 to 85°C or -40 to 70°C • Low Phase Noise • LVCMOS Output • Optional Electronic Frequency Tuning • RoHS Compliant / Lead Free Suggested Pad Layout Package Outline 0.358 (9.1mm) 1945 DOC050F 10.0 MHz 4 Bottom View 0.040 (1.02mm) 6 1 DNC = Do Not Connect DNC Side View 3 Top 5 View 2 0.260 (6.60mm) 0.100 (2.54mm) 0.040 (1.02mm) Top View 0.085 (2.16mm) 0.060 (1.52mm) 0.100 (2.54mm) 0.025 (0.64mm) 0.375 (9.52mm) 0.085 (2.16mm) DNC 0.275 (6.99mm) 1 0.555 (14.1mm) 0.060 (1.52mm) 0.307 (7.80mm) Keep Out Area Dimensional Tolerance: +/-0.005 (0.127mm) Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. www.conwin.com/support.html Pad Connections 1: N/C or Voltage Control (Vc) 2: Do Not Connect* 3: Ground 4: Output 5: Do Not Connect* 6: Supply Voltage (Vcc) *DO NOT connect "DNC" pads to ground or supply rails. Ordering Information Bulletin Page Revision Date Cx207 1 of 4 24 18 May 2021 ** Not all options available at Digi-Key DOC 05 Oscillator Type Frequency Stability 3.3 Vdc LVCMOS Output Surface Mount OCXO 02 = ±20 ppb 05 = ±50 ppb 10 = ±100 ppb 14 = ±140 ppb 25 = ±250 ppb 0 F Temperature Range Voltage Control Option 0 = 0 to 70°C 1 = -20 to 75°C 2 = -40 to 85°C 3 = -40 to 70°C F = OCXO (Fixed Freq.) V = VCOCXO (Voltage Controlled) -010.0M Output Frequency Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max* *Amount of numbers after the decimal point. M = MHz Example Part Numbers: DOC050F-010.0M = 9x14mm package, ±50 ppb, 0 to 70°C, 3.3 Vdc, CMOS Output, OCXO, Output Frequency 10.0 MHz DOC022V-020.0M = 9x14mm package, ±20 ppb, -40 to 85°C, 3.3 Vdc, CMOS Output, VCOCXO, 20.0 MHz @ 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Minimum Storage Temperature Supply Voltage - 3.3 Vdc (Vcc) Control Voltage (Vc) -55 -0.5 -0.5 Nominal - - - Operating Specifications Parameter Minimum Nominal Maximum Units Notes Maximum Units Notes ppb ppb ppb ppb ppb 1 1 1 1 1 125 4.5 Vcc+0.5 Center Frequency: (Fo) 10, 12.8, 19.44, 20, 25, 38.88, 40, or 49.152 Frequency Stability vs. Change in Temperature: (See Ordering Information) Stability Code 02 -20 - 20 Stability Code 05 -50 - 50 Stability Code 10 -100 - 100 Stability Code 14 -140 - 140 Stability Code 25 -250 - 250 Operating Temperature Range: (See Ordering Information) Temperature Code 0 0 - 70 Temperature Code 1 -20 - 75 Temperature Code 2 -40 - 85 Temperature Code 3 -40 - 70 Frequency Calibration: -1.0 - 1.0 Frequency Stability vs Load -20 - 20 Frequency Stability vs Voltage -20 - 20 Aging: Daily: -10 - 10 Aging: First Year: -300 - 300 Total Frequency Tolerance (20 Years) -4.60 - 4.60 Supply Voltage: (Vcc) 3.13 3.30 3.47 Power Consumption: Vcc = Nominal Voltage Commercial Temperature Range, 0 to 70 °C Turn On - - 2.5 Steady State @ 25°C - - 1.1 Industrial Temperature Range, -40 to 85 °C Turn On - - 3.0 Steady State @ 25°C - - 1.3 Phase Jitter: (BW: 12 KHz to 5MHz @ Fo=49.152MHz) - 0.3 0.35 Short Term Stability - - 1.0E-9/s Start-Up Time (when Vcc ramp is