H51RL-8M

THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS 5.0V 8 PIN DIP TRI-STATE CLOCK OSCILLATOR ABSOLUT E MAXIM UM RATIN GS PARAMETER Storage Temperature Supply Voltage Input Voltage UNITS (Vcc) (Vin) MINIMUM -55 -0.5 -0.5 NOMINAL M AXIMUM 125 7.0 Vcc+0.5 UNITS °C Vdc Vdc TABLE 2.0 (Fo) 5 -25 (Fo) 5 -50 (Fo) 5 -100 30 25 30 50 30 100 MHz ppm MHz ppm MHz ppm 1 TABLE 3.0 MINIMUM -5 (Vdd) (Icc) (IST) 4.5 NOMINAL 5.0 1.5 6 M AXIMUM 70 5.5 3.0 15 UNITS °C Vdc mA uA 2 TABLE 4.0 (Vih) (Vil) 70% Vdd 3 30% Vdd 100 10 Vdc Vdc ns ms TABLE 5.0 MINIMUM 4.0 -3.2 45 NOMINAL M AXIMUM 15 0.4 3.2 55 9 10 5 1 UNITS pF Vdc Vdc mA mA % ns ms ps rms ps rms NOTE 3 NOTE 1 1 TABLE 1.0 NOTE CW 0633 H51RL 8M MODEL SPECIFICATIONS: MODEL H51RL Frequency Range Frequency Tolerance: H51RL H52RL H53RL DESCRIPTION MODEL H52RL Frequency Range Frequency Tolerance: MODEL H53RL Frequency Range Frequency Tolerance: OPERATING SPECIFICATION S PARAMETER Operating Temperature Range Supply Voltage Supply Current Supply Current INPUT CHARACTERISTICS Enable Voltage (High) Disable Voltage (Low) Enable Time Disable Time Description: Connor Winfield models H5xRL are 5.0V HCMOS, Surface Mount, Fixed Frequency Crystal Oscillator (XO) designed for use in all applications requiring precision clocks with low power consumption. FEATURES 5 to 30 MHz 5.0V OPERATION LOW CURRENT CONSUMPTION TRI-STATE ENABLE/DISABLE OVERALL FREQUENCY TOLERANCE: H51RL ±25ppm H52RL ±50ppm H53RL ±100ppm TEMPERATURE RANGE: -5 to 70°C LOW JITTER: < 1ps HERMETICALLY SEALED PACKAGE RoHS 5/6 COMPLIANT HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Start-Up Time Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) (Voh) (Vol) (Ioh) (Ioh) 50 3 - PACKAG E CHARACTERISTICS Package Hermetically sealed metal package TABLE 6.0 Notes: 1) Inclusive of calibration @ 25 °C, frequency vs. temperature stability, suppl y voltage change, load change, shock and vibration, 10 years aging. 2) Standby current when oscillator is disabled. 3) Oscillator output i s enabled with no connection on pin 1 Package Outline Pin Connections Pin 1 2 3 4 Enable / Disable Function (Pin 1) High or Open Low 0.250 Max. (6.35mm) Connection Enable/Disable Ground Output Vcc Output Enable Disable (High Impedance) DATE: 08/28/06 ORDERING INFORMATION H51RL CLOCK SERIES - 8 MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Hc209 PAGE 1 OF 1 REV: 00 aCopyright 2001 Connor-Winfield all rights reserved.