HSM613-060.0M

3.3V Surface Mount Crystal Clock Oscillator HSM6x3-series Features:  XO)  2111 Comprehensive Drive • 1.0 to 170 MHz • 3.3V Operation • RoHS Compliant • Tri-State Enable/Disable • Power Saving Function: 10uA When Disabled • Overall Frequency Tolerance: HSM613 ± 25 ppm HSM623 ± 50 ppm HSM633 ± 100 ppm • Temperature Range: -40 to 85°C • Ceramic Surface Mount Package • Tape and Reel Packaging The Connor-Winfield HSM613, HSM623, and HSM633 are 7.5mm x 5mm, 3.3V HCMOS, Surface Mount, Fixed Frequency Crystal Oscillators (XO) designed for use in all applications requiring precision clocks. The RoHS compliant surface mount package is designed for high-density mounting and is optimum for mass production. Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) Minimum -55 -0.5 Nominal - - Maximum 125 5.0 Units Notes Units Notes °C Vdc Operating Specifications Parameter Minimum Nominal Maximum Frequency Range (Fo) HSM613 1.0 - 125 HSM623 1.0 - 170 HSM633 1.0 - 170 Frequency Tolerance HSM613 -25 - 25 HSM623 -50 - 50 HSM633 -100 - 100 Operating Temp Range -40 - 85 Supply Voltage (Vdd) 3.0 3.3 3.6 Supply Current (Icc) 1.544 to 31.999 MHz - - 15 32 to 49.999 MHz - - 20 50 to 66.999 MHz - - 25 67 to 124.999 MHz - - 40 125 to 170 MHz - - 50 MHz MHz MHz ppm ppm ppm °C Vdc 1 1 1 mA mA mA mA mA Input Characteristics Parameter Enable Voltage - (Vih) Disable Voltage - (Vil) Enable Time Disable Time Output Disable Current (lcc) Minimum ≥ 70% Vdd - - - - Nominal - - - - - Maximum - ≤ 30% Vdd 10 150 10 Units Vdc Vdc mS nS uA Notes: 1. Inclusive of calibration @ 25°C , frequency stability vs temperature, supply voltage change, load change, shock and vibration, 10 years aging. 2. Oscillator output is enabled with no connection on pad 1 Bulletin Page Revision Date SM044 1 of 3 16 07 April 2021 Notes 2 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com LVMOS Output Characteristics Parameter Load Voltage High (Voh) Low (Vol) Current High (loh) Low (lol) Duty Cycle at 50% of Vcc Rise / Fall Time: 20% to 80% 1.544 to 19.999 MHz 20.00 to 49.999 MHz 50.00 to 99.9999 MHz 100.00 to 170 MHz Start-Up Time Period Jitter Integrated Phase Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset Minimum Nominal Maximum Units - - - - - - - 3.0 2.0 1.5 0.5 - 3 0.5 -60 -90 -125 -140 -145 6.0 4.0 3.0 1.0 10 5 1 - - - - - nS nS nS nS mS ps RMS ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz - 2.91 - -2 - 45 - - - - - - - - - - 50 15 - 0.33 - 2 55 Notes pF Vdc Vdc mA mA % Package Characteristics Package Hermetically sealed ceramic package and grounded metal cover Environmental Characteristics Vibration: Shock: Soldering Process: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. RoHS compliant lead free. See soldering profile on page 3. Package Layout Pin Connections Pin Connections 1: Tri-State E/D 2: Ground 3: Output 4: VDD Suggested Pad Layout .200 (5.08mm) Vcc C-by 1 2 .078 TYP (2.0mm) GROUND .070 TYP (1.8mm) Bypasscapacitor. capacitorC–by C-by should Bypass , should bebe >0.01uF aceramic ceramiccapacitor capacitor .01uf. Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. OUTPUT .165 (4.2mm) E/D Dimensional Tolerance: ±.02” (.508mm) ±.005” (.127mm) 3 4 SM044 2 of 3 16 07 April 2021 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Test Circuit Solder Profile OSCILLOSCOPE A Vcc Temperature 260°C 260°C 220°C 180°C PROBE POWER SUPPLY 120°C OSC .01uf 150°C 3 4 V 1 2 CL 0 FREQ COUNTER INPUT for E/D Meets IPC/JEDEC J-STD-020C Output Waveform TF TR 10 s Up to 120 s 60 to 90 s Typical Typical "1" LEVEL Tape and Reel Dimensions 80% 50% 20% "0" LEVEL SYMMETRY Ordering Information Examples HSM633 CLOCK SERIES HSM633 CLOCK SERIES 048.0M CENTER FREQUENCY 125.0M CENTER FREQUENCY Tape and Reel Dimensions Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. SM044 3 of 3 16 07 April 2021