L753

THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS 3.3V LVDS 5x7.0mm CERAMIC SURFACE MOUNT HIGH FREQUENCY CLOCK OSCILLATOR ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage Input Voltage (Vcc) (Vcc) UNITS MINIMUM -55 -0.5 -0.5 NOMINAL M AXIMUM 125 4.6 Vcc+0.5 UNITS °C Vdc Vdc TABLE 2.0 MINIMUM (Fo) 200 -100 -40 (Vcc) (Icc) 3.135 NOMINAL 3.3 -75 -95 -110 -125 -120 M AXIMUM 800 100 85 3.465 60 10 3 UNITS MHz ppm °C Vdc mA ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 NOTE TABLE 1.0 NOTE CW 0643 L753 266.66M L753 DESCRIPTION OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 80MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset The Connor Winfield L753 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±100ppm, -40 to 85°C overall frequency tolerance, LVDS Differential Outputs and Tri-state Enable / Disable function. The L753 is designed using a 2X or 4X PLL multiplication to achieve the high output frequencies. INPUT CHARACTERISTICS PARAMETER Disable Input Voltage (Low) Enable Input Voltage (High) (Vil) (Vih) MINIMUM 0.7Vcc NOMINAL M AXIMUM 0.3Vcc UNITS Vdc Vdc FEATURES TABLE 3.0 NOTE 2 2 TABLE 4.0 MINIMUM (Vod) 250 45 NOMINAL 50 0.6 M AXIMUM 100 450 55 1.0 UNITS Ohms mV % nS 4 NOTE 3 - 3.3V OPERATION LVDS DIFFERENTIAL OUTPUTS ENABLE / DISABLE LOW JITTER