OD100LP-61012SV-010.0M

OD100LP-Series Low Phase Noise VCOXCO Description: Features: Aurora, Illinois 60505 The Connor-Winfield OD100LP-series Phone: 630- 851- 4722 is a low phase noise VCOCXO in a 1x1 • VCOCXO • 5Vdc or 12Vdc operation • 1x1" Metal Package • Frequency Stability Options: ±200, ±100, ±50, ±20 and ±10ppb • Temperature Range Options: 0 to 70°C, -40 to 85°C, -20 to 70°C • Sinewave or HCMOS Output • Reference Voltage Output Pin 4 • RoHS Compliant / Lead Free 2111 Comprehensive Drive Fax: 630- 851- 5040 www.conwin.com inch metal package. The OD100LP-series is designed for those applications that demand extremely low noise frequency sources. Pin Connections 1: 2: 3: 4: 5: Package Outline Output Ground (Case) Voltage Control Reference Voltage Supply Voltage (Vdd) .500 Max. (12.70mm) Marking Configuration Date Code (YYWW) 1825 Model Number Output Frequency Serial # Barcode Serial Number OD100LP-61005CV 10.0 MHz 123456789012 123456789012 Dimensional Tolerance: ±.005 (.127mm) Ordering Information OD100LP- 5 12 12 S V Package Temperature Range Frequency Stability Supply Voltage Output Type OCXO Type 5 = 0 to 70°C 6 = -40 to 85°C 7 = -20 to 70°C 8 = -40 to 75°C 10 = ±10 ppb 20 = ±20 ppb 50 = ±50 ppb 12 = ±100 ppb 22 = ±200 ppb 05 = 5.0 Vdc 12 = 12.0 Vdc S = Sinewave V = Voltage Controlled C = CMOS V1 = Voltage Control* OD100LP- = 1.0"x1.0"x0.5" OCXO Through Hole Package - 010.0M Output Frequency Frequency Format -xxx.xM Min -xxx.xxxxxxM Max *Max 6 digits after the decimal point. M = MHz Note: See page 2 for frequencies available at each stability level. Not all combinations of supply voltage and temperature ranges are available. * V1 specifies 0 to +5V CV range on +12V 100MHz model Bulletin Page Revision Date Cx292 1 of 5 08 21 July 2021 Example Part Number: OD100LP-51212SV-010.0M = 1.0" x 1.0" x 0.445" package, 0 to 70°C temperature range, ±100 ppb frequency stability, 12V Vdc supply voltage,Sinewave output, VCOCXO, 10.0 MHz output frequency. Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (5V Models) (12V Models) Control Voltage (Vc) Minimum -55 -0.5 -0.5 -0.5 Nominal - - - - Maximum Units Notes Maximum Units Notes Fo=100MHz Sinewave Output Units Notes 125 7.0 12.6 9.0 °C Vdc Vdc Vdc Operating Specifications Parameter Minimum Nominal Parameter Fo=10MHz Center Frequency: (Fo) - 10 and 100 - MHz Frequency Calibration Fo=10 MHz -200 - 200 ppb 1 Fo=100 MHz -800 - 800 ppb 1 Frequency Stability vs Temperature 2 Stability Code 10: -10 - 10 ppb 10MHz only Stability Code 20: -20 - 20 ppb 10MHz only Stability Code 50: -50 - 50 ppb 10MHz only Stability Code 12: -100 - 100 ppb 10MHz & 100MHz Stability Code 22: -200 - 200 ppb 10MHz & 100MHz vs. Supply Voltage Change Fo = 10MHz: -0.3 - 0.3 ppb Vcc ±5% Fo = 100MHz -10 - 10 ppb Vcc ±5% vs. Load Change Fo = 10MHz: -0.3 - 0.3 ppb Load ±5% Fo = 100MHz -10 - 10 ppb Load ±5% vs. Aging per day Fo = 10MHz -0.5 - 0.5 ppb 3 Fo = 100MHz -10 - 10 ppb 3 vs. Aging 1st Year Fo = 10MHz -50 - 50 ppb Fo = 100MHz -500 - 500 ppb Operating Temperature Range: Temperature Code 5: 0 - 70 °C Temperature Code 6: -40 - 85 °C 4 Temperature Code 7: -20 - 70 °C Temperature Code 8: -40 - 75 °C Warm-up Time at 25°C - - 2 Minutes 5 Short Term Stability (ADEV at 1s) Fo = 10MHz - 1.0E-11 - 6 Fo = 100MHz - 2.0E-11 - 6 Typical Phase Noise @1Hz offset @ 10Hz offset @ 100Hz offset @ 1KHz offset @ 10KHz offset @ 100KHz offset CMOS Output -95 -125 -145 -160 -165 -165 -65 -95 -125 -155 -165 -170 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. Cx292 2 of 5 08 21 July 2021 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Supply Voltage (Vdd) Parameter Minimum Parameter Minimum Nominal Maximum Units Notes Maximum Units Notes Units Notes Supply Voltage: Option 05: 4.75 5.00 5.25 Vdc Option 12: 11.4 12.0 12.6 Vdc Supply Current (Idd) Turn On (Vdd=5V) - 700 - mA Turn On (Vdd=12V) - 300 - mA Steady State at 25C (Vdd=5V) - 220 - mA Steady State at 25C (Vdd=12V) - 100 - mA Reference Voltage Reference Voltage (Vdd=5V) Reference Voltage (Vdd=12V, Fo=10.0MHz) Reference Voltage (Vdd=12V, Fo=100.0MHz) 3.8 3.8 8.5 Nominal 4.0 4.0 9.0 4.2 4.2 9.5 Vdc Vdc Vdc Input Characteristics - Voltage Control (Vc) Parameter Minimum Tuning Range (Fo=10MHz) ±0.5 Tuning Range (Fo=100MHz) ±1.5 Linearity - Control Voltage Range Vdd=5V 0.0 Vdd=12V, (Fo=10.0M): 0.5 Vdd=12V, (Fo=100.0M): Standard 0.5 Vdd=12V, (Fo=100.0M): Option V1 0.0 Tuning Slope Input Impedance 100K Nominal Maximum - ±1.5 ±3.0 ±4.5 - 20 2.0 4.0 2.5 4.5 4.5 8.5 2.5 5.0 Positive - - ppm ppm % Vdc Vdc Vdc Vdc Ohms CMOS Output Characteristics (Output Code C) Parameter Load Output Voltage: 5.0 Vdc High (Voh) Low (Vol) Duty Cycle at 50% of Vcc Rise / Fall Time: 10% to 90% Minimum Nominal Maximum Units 4.7 - 45 - - - 50 - - 0.4 55 6 V - 15 - pF Notes % ns Sinewave Output Characteristics (Output Code S) Parameter Load Output Power Harmonics Spurious Minimum - 7 - - Nominal 50 9 - - Maximum - 11 -30 -80 Units Ohms dBm dBc dBc Notes Package Characteristics OD100LP-Series Package Hermetically sealed, resistive welded package with grounded case. Environmental Characteristics Shock 500 G’s 1ms, Halfsine, 3 shocks per direction, per MIL-STD 202F, Method 213B Test Condition D. Sinusoidal Vibration 0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202F, Method 204D, Test Condition A. Random Vibration 5.35 G’s rms. 20 to 2000 Hz per MIL-STD-202F, Method 214,Test Condition 1A, 15 minutes each axis. Moisture 10 cycles, 95% RH, Per MIL-STD-202F, Method 112. Marking Permanency Per MIL-STD-202F, Method 215J. Attachment Method PCB Through Hole Mounted Resistance to Solder Heat Per MIL-STD-202F, Method 210, Condition E. Solder Process RoHS compliant, lead free. See solder profile. Notes: 1. At time of shipment after 60 minutes of operation, @25°C. 2. Frequency stability vs. change in temperature [±(Fmax-Fmin)/(2*Fo)]. 3. At time of shipment after 48 hours of operation. 4. The 100MHz frequency at 12V supply voltage is not available with temperature range -40 to 85C 5. Measured at 25°C, after 2 minutes will be within ±200ppb of the reference frequency measured 1 hour after turn-on. 6. The part is shielded from airflow during this measurement. Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. Bulletin Page Revision Date Cx292 3 of 5 08 21 July 2021 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Typical Phase Noise Fo=10MHz CMOS Output Short Term Stability (ADEV) Fo = 10MHz Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. Cx292 4 of 5 08 21 July 2021 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Test Circuit A PROBE Voltage Control POWER SUPPLY Vdd V 10 uF to 100 uF 3 4 2 0.01 uF 1 FREQ COUNTER Reference Voltage * 5 GROUND * SCOPE 15 pF for CMOS Load 50 Ohms for Sinewave Load Revision History Revision Date 00 08/30/17 01 09/13/17 02 09/14/17 03 07/03/18 04 12/18/18 05 02/06/19 06 04/30/20 07 01/21/21 08 07/21/21 Description New issue Added 10MHz phase noise and ADEV data. Updated Operating Specifications Expanded frequency stability table and updated supply current. Updated calibration specifications, reference voltages, and control voltage ranges. Updated Tuning Ranges Added Input Impedance specification Updated Voltage Control - adding V1 option Updated Voltage Control adding "Standard" and Changed Vref on 12V 10MHz part from 5V to 4Vdc Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. Cx292 5 of 5 08 21 July 2021