P322-155.52

5.0x7.0mm Surface Mount LVPECL Clock Oscillator Series Description The Connor Winfield Pxxx Series is a 5x7.0mm Surface Mount, LVPECL, Fixed Frequency Crystal Controlled Oscillator (XO) designed for applications requiring tight frequency stability, wide temperature range and low jitter. Operating at 2.5V or 3.3V supply voltage, the Pxxx Series provides an LVPECL Differential Outputs with enable / disable function. The surface mount package is designed for high-density mounting and is optimum for mass production. Model Specifications Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage Input Voltage (Vcc) Units Minimum -55 -0.5 -0.5 Nominal Maximum 125 7.0 Vcc+0.5 Units °C Vdc Vdc Table 2.0 (Fo) Minimum 25 Nominal Maximum 260 Units MHz ppm ppm ppm ppm °C °C °C °C Vdc Vdc mA ps RMS ps RMS ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ms Table 3.0 Minimum (Vil) (Vih) 0.7Vcc (Icc) Nominal Note Features: Model Pxxx - Series 5.0 x7.0mm Surface Mount Package 2.5V or 3.3V Operation LVPECL Output Logic Frequency Stabilities Available: P14x / P24x / P34x / P44x: +/-20ppm P11x / P21x / P31x / P41x: +/-25ppm P12x / P22x / P32x / P42x: +/-50ppm P13x / P23x / P33x / P43x: +/-100ppm Temperature Ranges Available: P1xx Series: 0 to 70°C P2xx Series: -40 to 85°C P3xx Series: 0 to 85°C P4xx Series: -20 to 70°C Low Jitter 70M) Phase Jitter- BW=12kHz to 20MHz (Fo< 70M) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset Startup Time (See Table 9) (See Table 9) (Icc) (See Table 9) (See Table 9) (See Table 9) (See Table 9) (Vcc) 2.375 3.135 2.500 3.3 60 3 0.5 1.5 -60 -90 -125 -140 -145 2.625 3.465 90 5 1.0 2.0 2 0 -20 0 -40 70 70 85 85 (See Table 9 for full part number) -20 20 -25 25 -50 50 -100 100 1 1 1 1 - Input Characteristics Parameter Disable Input Voltage (Low) Enable Input Voltage (High) Enable Time Disable Time Standby Current (when part is Disabled) Nominal 50 0.5 Maximum 0.3Vcc 2 200 30 Units Vdc Vdc ms ns uA Note 2 2 LVPECL Output Characteristics Parameter LOAD Voltage (Vcc = 2.5V) (High) (Vcc = 2.5V) (Low) Voltage (Vcc = 3.3V) (High) (Vcc = 3.3V) (Low) Duty Cycle Rise / Fall Time 20% to 80% (Voh) (Vol) (Voh) (Vol) Minimum 1.475 2.275 45 Maximum 50 0.880 1.68 55 1 Units Ohms Vdc Vdc Vdc Vdc % ns Table 4.0 Note 3 Bulletin Page Revision Date Ec217 1 of 2 06 18 Apr 2008 4 Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Notes Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. Package Outline 0.275 (7.0mm) 0.197 (5.0mm) Ordering Information CW 0745 P123 155.52M P Type: LVPECL Clock Series 5x7mm 1 Temperature Range: 1 = 0 to 70° C 2 = -40 to 85° C 3 = 0 to 85° C 4 = -20 to 70° C 2 Frequency Stability: 4 = +/-20 ppm 1 = +/-25 ppm 2 = +/-50 ppm 3 = +/-100 ppm 3 Supply Voltage: 2 = 2.5Vdc. 3 = 3.3Vdc. - 155.52M Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz 0.059 (1.5mm) Suggested Pad Layout Example: P123-155.52M = LVPECL Clock, 0 to 70°C, +/-50ppm, 3.3Vdc @ 155.52 MHZ Package Characteristics Table 5.0 Package Hermetically sealed ceramic package and metal cover. Soldering Process RoHS compliant, see solder profile on page 2. Environmental Characteristics Vibration: Shock: Soldering: Solderability Table 6.0 Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. SMD product suitable for Convection Reflow soldering. Peak temperature 260 C. Maximum time above 220 C, 60 seconds. Solderability per Mil Std 883E Method 2003 LVPECL Output Waveform Duty Cycle Q 80% 50% 20% Q tr tf Pad Connections - Enable / Disable Function Pad 1 2 3 4 5 6 Table 7.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc Table 8.0 Enable / Disable Function (Pad 1) High or Open Low Output Enable Disable (High Impedance) Test Circuit R3 Model Matrix Frequency Tolerance ±20ppm P142 P442 P342 P242 P143 P443 P343 P243 Table 9.0 Frequency Tolerance ±25ppm P112 P412 P312 P212 P113 P413 P313 P213 Frequency Tolerance ±50ppm P122 P422 P322 P222 P123 P423 P323 P223 Frequency Tolerance ±100ppm P132 P432 P332 P232 P133 P433 P333 P233 Supply Voltage 2.5Vdc 2.5Vdc 2.5Vdc 2.5Vdc 3.3Vdc 3.3Vdc 3.3Vdc 3.3Vdc Temperature Range 0 to 70°C -20 to 70°C 0 to 85°C -40 to 85°C 0 to 70°C -20 to 70°C 0 to 85°C -40 to 85°C Vcc 2.5V 3.3V R1 / R3 250 Ohms 130 Ohms E/D N/C 654 123 R1 R4 R2 R2 /R4 62.5Ohms 82 Ohms Solder Profile Temperature 260°C 220°C 180°C 150°C 120°C 260°C Tape and Reel Specifications 0 1 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Ec217 2 of 2 06 18 Apr 2008