V7223T-080.0M

Available at Digi-Key Low Jitter V7223T Series LVCMOS VCXO www.digikey.com 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Description Features: The Connor-Winfield V7223T Series models are 3.3V SMT 5.0x3.2mm voltage controlled crystal oscillators (VCXOs) with ultra low jitter. With LVCMOS outputs, the V7223T series is designed for PLL applications requiring high performance and low noise. • 3.3V Operation • Low Jitter 60fs RMS typical • Absolute Pull Range: ±50ppm • Pin 1 Input Impedance 10M ohm • 5.0x3.2mm Surface Mount Package • Tape and Reel Packaging • RoHS Compliant / Lead Free www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vdd) Control Voltage (Vc) Minimum Nominal Maximum Units -55 -0.5 -0.5 - - - 125 4.6 Vdd+0.5 °C Vdc Vdc Notes Operating Specifications Parameter Minimum Center Frequency (Fo) 50 Operating Temperature Range -40 Supply Voltage (Vdd) 3.135 Supply Current (Idd) - Period Jitter RMS - Integrated Phase Jitter (BW=12kHz to 20MHz) Fo=80MHz Fo=100MHz Fo=125MHz Fo=156.25MHz Typical Phase Noise for 100MHz SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1kHz offset SSB Phase Noise at 10kHz offset SSB Phase Noise at 100kHz offset SSB Phase Noise at 1MHz offset SSB Phase Noise at 10MHz offset - - - - - - - Nominal Maximum Units - - 3.3 - 3 156.25 85 3.465 25 5 MHz °C Vdc mA ps RMS 100 60 60 60 fs RMS fs RMS fs RMS fs RMS -70 -105 -130 -148 -158 -163 -164 - - - - - - - dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Notes Input Characteristics Parameter Control Voltage Range (Vc) Typical Slope (Vc=1.65Vdc) Absolute Pull Range (APR) Fo = 50MHz to 125MHz Fo >125MHz Monotonic Linearity DC Input Resistance (Pad 1) Modulation Bandwidth (3dB) Enable / Disable Function (O/E) Enable Input Voltage - High (Vih) Disable Input Voltage - Low (Vil) Minimum Nominal Maximum Units 0.3 1.65 3.0 Vdc Notes - 65 - ppm/V ±50 ±30 -10 - 25 - - - 10M - - - 10 - - ppm ppm % Ohm kHz 1 1 2.4 - - - - 0.4 Vdc 2 Notes LVCMOS Output Characteristics Parameter Load Voltage High (Voh) Low (Vol) Duty Cycle at 50% Level Rise / Fall Time 20% to 80% Bulletin Page Revision Date Vx673 1 of 3 03 24 Nov 2020 Notes: Minimum Nominal Maximum Units - 0.9*Vdd - 45 - - - - 50 0.5 15 - 0.1*Vdd 55 2.0 pF Vdc Vdc % nS 1. Absolute pull range (APR) is the minimum guaranteed pull range of the VCXO under all conditions over the lifetime operation. Including calibration @ 25°C, frequency vs. change in temperature, frequency vs. change in supply voltage, frequency vs. change in load, shock and vibration and aging for ten years. The APR is referenced to Fo. Positive Transfer Function. 2. Output is enabled with no connection on Pad 2. When oscillator is disabled the output is high impedance. 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Package Characteristics Package Hermetically sealed, ceramic package with grounded metal cover. Soldering Process RoHS compliant / lead free, see solder profile on page 3. Typical Phase Noise V7223T-100.0M Ordering Information V7223T - 050.0M V7223T - 080.0M V7223T - 098.304M V7223T - 100.0M V7223T - 122.88M V7223T - 125.0M V7223T-148.5M V7223T-155.52M V7223T-156.25M Package Layout Enable / Disable Function Enable / Disable Function (Pad 2) No Connection High Low Output Enable Enable Disable (High Impedance) Pad Connections Suggested Pad Layout Pin Function 1: Control Voltage 2: Output Enable (OE) 3: Ground 4: Output 5: N/C 6: Vdd Bulletin Page Dimensional Tolerance ±0.13mm Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2020 The Connor-Winfield Corporation Not intended for life support applications. Vx673 2 of 3 03 24 Nov 2020 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Test Circuit Output Waveform Tape and Reel Dimensions Solder Profile Temperature PIN 1 .53 (13.5mm) 8.46 DIA (215mm DIA) .08 (2.0mm) .217 .08 260°C 260°C 220°C 180°C (5.5mm) 150°C (2.0mm) 120°C .15 (3.7mm) 9.84 DIA (250mm DIA) .157 0 (4.0mm) .08 (2.0mm) 3.15 (8.0mm) 10 s Up to 120 s 60 to 90 s Typical Typical 3.15 (8.0mm) .06 DIA (1.5mm DIA) 1.00 DIA (25mm DIA) Meets IPC/JEDEC J-STD-020C Dimensional Tolerance: ±.02" (.508mm) ±.005" (.127mm) .217 (5.5mm) MEETS EIA-481A and EIAJ-1009B 2,000 PCS/REEL .07 (1.75mm) .47 (12.0mm) Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2020 The Connor-Winfield Corporation Not intended for life support applications. Vx673 3 of 3 03 24 Nov 2020