VBLD861-081.92M

Available at Digi-Key Ultra Low Phase Noise VCXO VBLD861-Series www.digikey.com 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Description: Features: The Connor-Winfield RoHS compliant VBLD861 is a 3.3V Voltage Controlled Crystal Oscillator (VCXO) with LVCMOS output. The VBLD861 is designed with a 3rd overtone crystal for ultra-low phase noise and jitter performance. • 3.3 Vdc Operation • Pull Range: ±20ppm • Temperature Range Options: 0 to 85°C, 0 to 70°C, -40 to 85°C, and -20 to 70°C • Low Jitter: 60fs Typical • LVCMOS Output • 9x14mm SMT Package • Tape and Reel Packaging • RoHS Compliant / Lead Free Suggested Pad Layout Package Outline Dimensional Tolerance: ±0.005 inches (0.127mm) Top View Pad Connections 1: Control Voltage (Vc) 2: Ground 3: Output 4: Supply Voltage (Vdd) Ordering Information Bulletin Page Revision Date VX671 1 of 4 05 05 Jan 2021 VBLD 8 6 1 Oscillator Series Output Logic Configuration Details 3.3V VCXO 9x14 mm SMT Package 8 = LVCMOS Temperature Range 3 = 0 to 85°C 5 = 0 to 70°C 6 = -40 to 85°C 7 = -20 to 70°C Example Part Numbers: VBLD861-100.0M VBLD861-081.92M 1 = Standard 100.0M Output Frequency 80.0 MHz 81.92 MHz 100.0 MHz 119.0 MHz 122.88 MHz 125.0 MHz 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vdd) Control Voltage (Vc) Minimum -40 -0.5 -0.5 Nominal - - - Maximum Units Notes Maximum Units Notes Maximum Units Notes 85 4.6 Vdd + 0.5 °C Vdc Vdc Operating Specifications Parameter Minimum Nominal Center Frequency: (Fo) 80 - 125 MHz Operating Temperature Range Option 3 0 - 85 °C Option 5 0 - 70 °C Option 6 -40 - 85 °C Option 7 -20 - 70 °C Frequency Stability vs Temperature - ±10 - PPM Frequency Stability vs Supply Voltage -0.2 - 0.2 PPM 3.3V+/-5% Frequency Stability vs Aging (10 Yrs) - - ±5 PPM Supply Voltage: (Vdd) 3.135 3.3 3.465 Vdc Supply Current: (Idd) - 15 30 mA Jitter @ Fo=100 MHz Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter - 60 100 fs RMS 1 Typical SSB Phase Noise @ Fo=100 MHz @ 10 Hz offset - -80 - dBc/Hz @ 100 Hz offset - -110 - dBc/Hz @ 1 kHz offset - -140 - dBc/Hz @ 10 kHz offset - -155 - dBc/Hz @ 100 kHz offset - -162 - dBc/Hz @ 1 MHz offset - -165 - dBc/Hz Start-Up Time - - 10 ms Input Characteristics Parameter Control Voltage Range (Vc) Pull Slope at Vc=1.65V Pull Range at 25°C Absolute Pull Range (APR) Monotonic Linearity DC Input Impedance Modulation Bandwidth (3dB) Minimum 0.3 - - ±5 -10 50K 10 Nominal 1.65 15 ±20 - - - - 3.0 - - - 10 - - Vdc ppm/V ppm ppm % Ohm kHz Maximum Units 2 3 LVCMOS Output Characteristics Parameter Load Voltage (High) Voh (Low) Vol Duty Cycle at 50% Level Rise / Fall Time: 20% to 80% Minimum - 0.9Vdd - 45 - Nominal 15 - - 50 - - - 0.1Vdd 55 2 Notes: 1. BW= 12 kHz to 20 MHz 2. Absolute Pull Range (APR) is the minimum guaranteed pull range of the VCXO under all conditions over lifetime operation including calibration @ 25°C,frequency stability vs. the change in temperature, frequency vs. change in supply voltage, frequency vs. change in load, shock and vibration and 10 years aging. The APR is referenced to (Fo). Positive transfer function. 3. Measured from pin 1 to ground. Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. Notes pF Vdd Vdd % ns VX671 2 of 4 05 05 Jan 2021 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Package Characteristics: Package N on-hermetic package consisting of FR4 substrate and grounded metal cover. Environmental Characteristics Shock 500 G’s 1ms, Halfsine, 3 shocks per direction, per MIL-STD 202G, Method 213B Test Condition D. Sinusoidal Vibration 0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202G, Method 204D, Test Condition A. Random Vibration 5.35 G’s rms. 20 to 2000 Hz per MIL-STD-202G, Method 214,Test Condition 1A, 15 minutes each axis. Moisture 10 cycles, 95% RH, Per MIL-STD-202G, Method 112. Marking Permanency Per MIL-STD-202G, Method 215J. Solder Process Recommendations: RoHS compliant, lead free. See solder profile on page 4. In-line reflow: Refer to recommended reflow pre-heat and reflow temperatures on page 4. Component solder is Pb free high temperature eutectic alloy with a melting point of 221°C. In-line oven profile: We recommend using KIC profiler or similar device placing one of the thermocouples on the device to insure that the internal package temperature does not exceed 221°C. Removal of device: If for any reason the device needs to be removed from the board, use a temperature controlled repair station with profile monitoring capabilities. Following a monitored profile will insure the device is properly pre-heated prior to reflow. Refer to IPC 610E for inspection guidelines. Recommended Cleaning Process: (If required) Device is non-hermetic. Do not submerge the device. We recommend in-line warm water wash with air knife and drying capabilities. If cleaner does not have drying capability, then use hot air circulated oven. Boards should be placed in the oven vertically for good water runoff. Device must be dried properly prior to use! Note: If saponifier is used make sure the device is rinsed properly to insure all residues are removed. PH of saponifier should not exceed 10. Drying Temperature: Between 85 to 100°C. Drying Time: Time will vary depending on the board size. Typical Frequency vs Temperature Fo=100MHz Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. VX671 3 of 4 05 05 Jan 2021 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Typical Phase Noise Fo = 100MHz Output Waveform Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C Test Circuit Vdd 0 15pF 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C CONTROL VOLTAGE Tape and Reel Information SM-MECH42 Bulletin Page Revision Date Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2021 The Connor-Winfield Corporation Not intended for life support applications. VX671 4 of 4 05 05 Jan 2021