X533

THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS 3.3V SURFACE MOUNT 5.0 x 7.5mm LVDS CLOCK OSCILLATOR ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -40 -0.5 NOMINAL MAXIMUM 100 7.0 UNITS °C Vdc TABLE 2.0 MINIMUM (Fo) 100 -100 0 (Vcc) (Icc) 3.135 NOMINAL 3.3 -75 -95 -110 -125 -120 MAXIMUM 400 100 85 3.465 60 10 3 UNITS MHz ppm °C Vdc mA ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 NOTE TABLE 1.0 NOTE X533M2 333M X533 DESCRIPTION OPERATING SPECIFICATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 80MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset The Connor-Winfield X533 is a 3.3V Crystal Controlled Oscillator (XO) with LVDS Differential outputs. The X533 is designed for use with PLL systems requiring tight frequency stability vs. temperature. The use of multiplication is utilized in this oscillator design. INPUT CHARACTERISTICS PARAMETER Enable Input Voltage (Low) Disable Input Voltage (High) (Vil) (Vih) MINIMUM 0.7Vcc NOMINAL MAXIMUM 0.3Vcc UNITS Vdc Vdc TABLE 3.0 NOTE 2 2 - FEATURES 3.3V OPERATION LVDS OUTPUT CHARACTERISTICS PARAMETER LOAD Output Differential Voltage Duty Cycle at 50% Level Rise / Fall Time (Vod) MINIMUM 250 45 NOMINAL 50 0.6 MAXIMUM 100 450 55 1.0 UNITS Ohms mV % nS TABLE 4.0 NOTE 3 LOW JITTER