PDBFS500

Power Distribution Block Maximize Short-Circuit Current Rating While Improving Safety UL Listed, IP-20 Enclosed Power Distribution Block Offer High SCCR New 2005 NEC® and UL508A SCCR marking requirements state that the following equipment must be marked with an assembly SCCR: • Industrial Control Panels [409.110] • Industrial Machinery Electrical Panels [670.3(A)] • Certain HVAC Equipment [440.4(B)] This SCCR is based on the lowest-rated component, or weakest link, in the assembly. Unmarked power distribution blocks will default to a rating of 10kA. The new Cooper Bussmann® enclosed Series PDBFS offers both high SCCR and enhanced shock protection. • UL Listing Meets Requirements Eliminating Investigation and Procedures Listed to UL1953 for minimum spacing requirements of at least 1˝ through air and 2˝ over surface as required for UL508A industrial control panel feeder applications. See back page. • High SCCR Up to 200kA rating enables the power distribution block to be one of the highest rated devices in the panel. This helps achieve a high assembly SCCR. • Enclosed for Enhanced Electrical Safety Safer work conditions. IP-20 finger-safe under specific conditions. • Easy Panel Mounting Gangable for flexible multi-pole installations, plus small footprint for tight spacing. • Simple and Fast Installation DIN rail mount or panel mount, (See datasheet 1049). Captive terminal screws are backed out at the factory. • Meet Wireway Requirements Series PDBFS can be used to meet the new 2005 NEC® 376.56(B) requirement. Cooper Bussmann UL Listed PDBs With High SCCRs Feature/Benefits • • • • • UL Listed 1953. File E256146 CSA Certified, Class 6228-01, File 15364 600Vac or dc (UL1953), 690Vac or dc (IEC) SCCR up to 200,000kA, see table for details Single pole, gang for multiple pole applications with accessory part 2A1279 interlocking dovetail • Datasheet #1049 located at www.cooperbussmann.com UL Listed 1953 vs. UL Recognized 1059 Listed products require simply checking to ensure that the product is used in accordance with its listing and labeling. However, for recognized products, such as power terminal blocks, the “Conditions of Acceptability” must be investigated to ensure the product is suitable for the specific application, and then the procedure description must be documented in the manufacturer’s procedure for the assembly. Series PDBFS Terminal Copper Conductor Capability Line Load Configuration Catalog Number (All Single Pole) Short-Circuit Current Rating Data Conductors Max Fuse Class & Amp** Line AWG or kcmil Openings per Pole Amps Wire Range 2/0 - 8 AWG 70 - 10 mm2 2/0 - 8 AWG 70 - 10 mm2 Wire Range Line 175A 2/0 - 8 AWG 70 - 10 mm2 4 - 14 AWG 25 - 2.5 mm2 Load Load AWG or kcmil J LPJ T JJS JJN RK1 LPS-RK LPN-RK RK5 FRS-R FRN-R SCCR PDBFS204 2/0 - 8 2/0 - 8 4 - 12 200 200 100 100† 100† 100† 200 200† 100† 100† 400† 400† 100† 400 600 600 600 400 60 60† 60† 60† 100 100† 30† 30† 200† 200† 30† 200 200 400 600 200 200kA 200kA 100kA 50kA 200kA 200kA 50kA 100kA 200kA 50kA 50kA 200kA 100kA 200kA 100kA 100kA PDBFS220 175A 2/0 - 8 4 - 14 200 200 175† 175† 200† 200† 400 400 200† 175† 600 600† 200† 600 600 600 600 600 400 400 200† 175† 600 600† 200† 600 800 800* 800* 600 PDBFS303 310A 350kcmil - 6 AWG 350kcmil - 6 AWG 150 - 16 mm2 150 - 16 mm2 2 - 14 AWG 35 - 2.5 mm2 4 - 14 AWG 25 - 2.5 mm2 350 - 6 350 - 6 2-6 PDBFS330 500kcmil - 6 AWG 380A 240 - 16 mm2 570A 300kcmil - 4 AWG 150 - 12 mm2 500 - 6 300 300 - 4 350 350 - 4 500 500 - 6 2 - 14 4-8 4 4 - 14 350 350 - 4 500 500 - 6 PDBFS377 PDBFS500 620A 350kcmil - 4 AWG 350kcmil - 4 AWG 185 - 12 mm2 185 - 12 mm2 PDBFS504 760A 500kcmil - 6 AWG 500kcmil - 6 AWG 240 - 16 mm2 240 - 16 mm2 Ampacities 75C per NEC® Table 310.16 and UL508A Table 28.1 *Class L 800A (KRP-C 800_SP) or less fuses suitable for this particular SCCR case. ** Class G 60A (SC-60) or less or Class CC 30A (LP-CC-30, FNQ-R-30, KTK-R-30) or less are suitable for all these SCCRs in this table. † Higher SCCR may be available, check latest datasheet 1049. Part No. PDBFS204 PDBFS220 PDBFS303 PDBFS330 PDBFS377 PDBFS500 PDBFS504 Dimensions inches (mm) Width (A) Length (B) 1.030 (26.16) 3.372 (94.80) 1.030 (26.16) 3.372 (94.80) 1.550 (39.37) 4.665 (118.50) 1.550 (39.37) 4.665 (118.50) 1.875 (47.62) 4.665 (118.50) 2.380 (60.45) 4.665 (118.50) 2.560 (65.02) 4.665 (118.50) Height (C) 2.146 (54.50) 2.146 (54.50) 2.874 (73.00) 2.874 (73.00) 2.933 (74.50) 2.598 (66.00) 3.150 (80.00) H B A For additional information see Datasheet #1049 located at www.cooperbussmann.com/products/datasheet.asp ©2007 Cooper Bussmann • St. Louis, MO 63178 6 3 6 - 3 9 4 - 2 8 7 7 • w w w. c o o p e r b u s s m a n n . c o m Printed in USA Reorder # 3137 1-07-5M