TR/3216FF5-R

Effective October 2017 Supersedes May 2017 Technical Data 3001 3216FF HALOGEN Fast-acting Chip™ surface mount fuse HF FREE Pb Environmental data Product features • • • • • AEC-Q200 qualified (250 mA to 7 A) Fast-acting surface mount fuse Ratings up to 30 amps Excellent temperature and cycling characteristics Compatible with reflow and wave solder Agency information • UL Recognition Guide JDYX2 & File E19180. • CSA Component Acceptance: 053787 C 000 & Class No: 1422 30. • cURus Recognition File: E19180, Guide JDYX2/ JDYX8 • Thermal Shock: MIL-STD-202, Method 107, Test Condition B (-65 °C to +125 °C) • Vibration: MIL-STD-202, Method 204, Test Condition C (55 Hz - 2 kHz, 10 G) • Moisture Resistance: MIL-STD-202, Method 106,10 day cycle • Solderability: ANSI/J-STD-002, Test B • Additional resistance to solder heat test: MILSTD-202G Method 210F Condition A • Operating Temperature: -55 ºC to +125 ºC • AEC-Q200 qualified (250 mA to 7 A) Ordering • Specify packaging and product code (i.e., TR/3216FF250-R) Amp Rating 250mA - 30A 1.25A - 3A 250mA - 3A 4A - 7A 10A - 30A Soldering method Electrical Characteristics % of Amp Rating 100% 200% 250% 350% 350% Opening Time 4 Hrs. Min. 60 Sec. Max. 5 Sec. Max. 1 Sec. Max. 5 Sec. Max. • Wave Immersion: 260 °C, 10 sec max. • Infrared Reflow: 260 °C, 30 sec max. Part Number 3216FF250-R 3216FF375-R 3216FF500-R 3216FF750-R 3216FF1-R 3216FF1.25-R 3216FF1.5-R 3216FF2-R 3216FF2.5-R 3216FF3-R 3216FF4-R 3216FF4.5-R 3216FF5-R 3216FF6.5-R 3216FF7-R 3216FF10-R 3216FF12-R 3216FF15-R 3216FF20-R 3216FF25-R 3216FF30-R Vac 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 Volt Ratings Vdc 63 63 63 63 63 63 63 63 63 63 32 32 32 32 32 24 24 24 24 24 24 Specifications Interrupting Rating* Typical DC Cold (amps) AC/DC Resistance (Ω)** 50 3.5000 50 1.7500 50 0.9800 50 0.5400 50 0.2190 50 0.1700 50 0.1190 50 0.0660 50 0.0460 50 0.0360 50 0.0180 50 0.0160 50 0.0140 50 0.0086 50 0.0070 150 0.0045 150 0.0039 150 0.0031 150 0.0018 250 0.0014 300 0.0012 Typical Melt I2t (A2S) DC*** 0.00038 0.00077 0.00190 0.0053 0.030 0.046 0.093 0.126 0.260 0.275 0.337 0.405 0.534 2.294 3.623 2.0 7.0 25.5 48.6 32.0 43.0 Typical Voltage Drop (V)† 1.40 0.73 0.66 0.63 0.20 0.18 0.18 0.16 0.14 0.13 0.11 0.10 0.09 0.076 0.078 0.062 0.070 0.066 0.060 0.057 0.068 UR X X X X X X X X X X X X X X X X X X X X X Agency Approvals CSA cURus X X X X X X X X X X X X X X X X X X X X X *AC Interrupting Rating measured at rated voltage with a unity power factor; DC Interrupting Rating measured at rated voltage, time constant of less than 50 microseconds, battery source **Typical DC Cold Resistance measured at 10% of rated current ***Typical Melting I2t measured with a battery bank at rated DC voltage, 10x-rated current, not to exceed IR, time constant of calibrated circuit less than 50 microseconds (6.5A - 30A measured at interrupting rating) †Typical Voltage Drop measured at rated current after temperature stabilizes. It is recommended that fuses be mounted with ceramic (white) side facing up. Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at elevated ambient temperatures. 3216FF Fast-acting Chip™ surface mount fuse Technical Data 3001 Effective May 2017 25A 30A 15A Time in Seconds 20A Recommended Pad Layout - mm (in) 10A 12A 5A 1.5A 2A 2.5A 3A 4A 4.5A 0.375A 0.25A Drawing Not to Scale 0.75A 1A 0.5A 6.5A 7A Time-Current Curve Dimension - mm/inches Current in Amps Packaging Packaging Code Prefix TR Description 3000 fuses on 8mm tape-and-reel on a 7 inch (178mm) reel per EIA Standard RS481 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 3001 BU-SB11302 October 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.