K1010D

K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Description  Schematic The K1010 series consist of an infrared emitting diode, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. 1. Anode 2. Cathode 3. Emitter 4. Collector  Features 1. Current transfer ratio ( CTR：Min. 50% at IF=5mA VCE=5V ) 2. High isolation voltage between input and output ( Viso：5000Vrms ) 3. Pb free and RoHS compliant 4. MSL class 1 5. Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN62368-1, EN60601-1 • CQC Approved: GB8898-2011, GB4943.1-2011  Applications • System appliances • Measuring instruments • Computer terminals • Programmable controllers • Medical instruments • Physical and chemical equipment • Signal transmission between circuits of different potentials and impedances Cosmo Electronics Corp. Document No. 69P00001.6 -1- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Outside Dimension Unit : mm 1.Dual-in-line type. 2.Surface mount type. K10101X K10104X 7.62 7.62 4.60 6.50 6.50 0.25 3.50 2.70 0.25 1.00 10.00±0.4 0.50 1.20 0.10±0.1 0~10° 0.40 3.00 3.50 4.60 1.20 2.54 2.54 13.00° 13.00° 4.Long creepage distance for surface mount type. 3.Long creepage distance type K10106X K10103X 10.16 7.62 7.62 4.60 3.50 0.30 0.25 2.70 1.20 0~10° 1.20 2.54 0.50 TOLERANCE：±0.2mm 2.54  0.90±0.25 11.80+0.2 -0.5 0.25 3.50 10.16±0.50 3.00 0.90±0.25 0.25 4.60 6.50 6.50 Device Marking Notes: cosmo 1010 817 YWW cosmo 1010 817 YWW □ Cosmo Electronics Corp. Document No. 69P00001.6 -2- Y: Year code / WW: Week code □: CTR rank http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Absolute Maximum Ratings (Ta=25℃) Parameter Input Output  Symbol Rating Unit Forward current IF 50 mA Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Collector-emitter voltage VCEO 80 V Emitter-collector voltage VECO 6 V Collector current IC 50 mA Collector power dissipation PC 150 mW Total power dissipation Ptot 200 mW Isolation voltage 1 minute Viso 5000 Vrms Operating temperature Topr -55 to +115 ℃ Storage temperature Tstg -55 to +125 ℃ Soldering temperature 10 seconds Tsol 260 ℃ Electro-optical Characteristics Input Output (Ta=25℃) Parameter Symbol Forward voltage VF Peak forward voltage VFM Conditions Min. Typ. Max. Unit IF=20mA - 1.2 1.4 V IFM=0.5A - - 3.0 V Reverse current IR VR=4V - - 10 μA Terminal capacitance Ct V=0, f=1KHz - 30 - pF Collector dark current ICEO VCE=20V, IF=0 - - 0.1 μA Current transfer ratio CTR IF=5mA, VCE=5V 50 - 600 IF=1mA, VCE=5V 15 - - Collector-emitter saturation Transfer Isolation resistance characteristics Floating capacitance VCE(sat) IF=20mA, IC=1mA Riso DC500V 5x10 0.1 10 10 11 % 0.2 V - Ω Cf V=0, f=1MHz - 0.6 1.0 pF Cut-off frequency fC VCC=5V, IC=2mA, RL=100Ω - 80 - KHz Response time (Rise) tr - 4 18 μs Response time (Fall) tf - 3 18 μs Cosmo Electronics Corp. Document No. 69P00001.6 VCE=2V, IC=2mA, RL=100Ω -3- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo Fig.1 Current Transfer Ratio CTR ( % ) K1010 A K1010 B K1010 C K1010 D K1010 E 80 ~ 160 130 ~ 260 200 ~ 400 300 ~ 600 50 ~ 600 Marking of Classification A B C D Blank,A,B,C,D,E V5 5 2 = = Ea C T V K1010 Model No. 0 0 0 0 0 0 0 0 5 0 0 0 0 0 5 0 2 5 3 5 0 5 0 2 1 4 4 3 5 1 Classification table of current transfer ratio is shown below. Current Transfer Ratio CTR ( % ) vs. Forward Current ℃ 0 5 0 2 0 1 5 2 1 5 . 0 0 Forward Current IF (mA) Fig.2 Collector Power Dissipation Fig.3 Collector Dark Current vs. Ambient Temperature vs. Ambient Temperature -5 10 200 Collector Dark Current ICEO ( A ) Collector Power Dissipation PC ( mW ) 250 150 100 50 0 -55 0 25 50 75 VCE=20V 10-6 -7 10 -8 10 -9 10 -10 10 -11 10 -55 115 125 Ambient Temperature Ta (℃) 75 115 Fig.5 Forward Current vs. Ambient Temperature vs. Forward Voltage 60 500 Forward Current IF ( mA ) Forward Current IF ( mA ) 50 Ambient Temperature Ta (℃) Fig.4 Forward Current 50 40 30 20 10 0 -55 25 0 0 25 50 75 100 50 Ta=75° C 50° C 25° C 0° C 20 -25° C 10 5 2 1 1.0 115 125 Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69P00001.6 200 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Forward Voltage VF (V) -4- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo Fig.6 Collector Current vs. Collector-Emitter Voltage Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 30 25 150 Ta=25°C 20mA Relative Current Transfer Ratio ( % ) Collector Current IC (mA) IF =30mA 20 15 10mA 10 5mA 5 0 0 1 2 3 4 5 6 7 8 IF =5mA VCE=5V 100 50 0 -55 9 Collector-Emitter Voltage VCE (V) Collector-Emitter Saturation Voltage VCE ( V ) Collector-Emitter Saturation Voltage VCE ( V ) 0.12 0.10 0.08 0.06 0.04 0.02 25 50 75 Ta=25° C 6 Ic=0.5m A 5 Ic=1m A 4 Ic=3m A 3 Fig.11 Response Time (Fall) vs. Load Resistance 100 Response Fall Time ( us ) Response Rise Time ( us ) 50 tr 20 10 5 2 1 0 .5 0 .2 50 0 .1 1 10 Load Resistance RL (KΩ) Cosmo Electronics Corp. Document No. 69P00001.6 VC E = 2 V Ic = 2 m A T a = 2 5 °C tf 20 10 5 2 1 0 .5 0 .2 0 .1 0 .1 10 5 0 Forward Current IF (mA) Fig.10 Response Time (Rise) vs. Load Resistance VCE =2V Ic = 2 m A T a=25°C Ic=7m A 1 0 115 Ic=5m A 2 Ambient Temperature Ta (℃) 100 115 7 IF =20m A Ic= 1m A 0 75 Voltage vs. Forward Current 0.16 -55 50 Fig.9 Collector-Emitter Saturation vs. Ambient Temperature 0 25 0 Ambient Temperature Ta (℃) Fig.8 Collector-Emitter Saturation Voltage 0.14 -25 0 .1 1 10 Load Resistance RL (KΩ) -5- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo Test Circuit for Response Time c c V  F I % 0 9 e c V 3 e c V 4 2 L R 1 F I % 0 1 -6- f t r t Cosmo Electronics Corp. Document No. 69P00001.6 http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Recommended Soldering Conditions (a) Infrared reflow soldering：  Peak reflow soldering： 260℃ or below (package surface temperature)  Time of peak reflow temperature： 10 sec  Time of temperature higher than 230℃： 30-60 sec  Time to preheat temperature from 180~190℃： 60-120 sec  Time(s) of reflow： Two  Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering：  Temperature： 260℃ or below (molten solder temperature)  Time： 10 seconds or less  Preheating conditions： 120℃ or below (package surface temperature)  Time(s) of reflow： One  Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions：  Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.  Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69P00001.6 -7- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo ● Numbering System K1010 X Y (Z) Notes: K1010 = Part No. X = Lead form option (1,3,4,6) Y = CTR rank option (A ~ E) Z = Tape and reel option (TLD, TRU) Option Description Packing quantity 4 (TLD) surface mount type package + TLD tape & reel option 2000 units per reel 4 (TRU) surface mount type package + TRU tape & reel option 2000 units per reel 6 (TLD) 6 (TRU) long creepage distance for surface mount type package + TLD tape & reel option long creepage distance for surface mount type package + TRU tape & reel option 2000 units per reel 2000 units per reel ● Recommended Pad Layout for Surface Mount Lead Form 2.Long creepage distance for surface mount type. 4 pin L 1.Surface mount type. 4 pin SMD Unit : mm Cosmo Electronics Corp. Document No. 69P00001.6 -8- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo ● 4-pin SMD Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P00001.6 -9- http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo 參考用 ● 4-pin L Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P00001.6 - 10 - http://www.cosmo-ic.com K1010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Application Notice The statements regarding the suitability of products for certain types of applications are based  on cosmo's knowledge of general applications of cosmo products. Such statements are not binding  statements about the suitability of products for a particular application. It is the customer's  responsibility to verify the specifications are suitable for use in a particular application. Customers  are solely responsible for all aspects of their own product design or applications. The parameters  provided in the datasheet may vary in different applications and performance may vary over time.  All operating parameters (including typical parameters) must be validated by customer's technical  experts for different applications. cosmo assumes no liability for customer’ product design or  applications. Product specifications do not expand or otherwise change cosmo's terms and  conditions of purchase, including but not limited to the warranty expressed therein.      When using cosmo products, please comply with safety standards and instructions. cosmo has  no liability and responsibility to the damage caused by improper use of the instructions specified in  the specifications.      cosmo products are designed for use in general electronic equipment such as  telecommunications, office automation equipments, personal computers, test and measurement  equipments, consumer electronics, industrial control, instrumentation, audio, video.    cosmo devices shall not be used in equipment that requires higher level of reliability and  safety, such as nuclear power control equipment, telecommunication equipment(trunk lines),  space application, medical and other life supporting equipments, and equipment for aircraft,  military, automotive or any other application that can cause human injury or death.    cosmo reserves the right to change the specifications, data, characteristics, structure,  materials and other contents at any time without notice. Please contact cosmo to obtain the latest  specification.     cosmo disclaim any and all liability for any errors, inaccuracies or incompleteness contained in  any datasheet or in any other disclosure relating to any product.    Cosmo Electronics Corp. Document No. 69P00001.6 - 11 - http://www.cosmo-ic.com