K30101B

K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo   Schematic Description The K3010 series consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. 1. Anode, Cathode 2. Anode, Cathode 3. Emitter 4. Collector  Features 1. Current transfer ratio ( CTR：Min. 50% at IF=± 1mA VCE=5V ) 2. High isolation voltage between input and output ( Viso：5000Vrms ) 3. Pb free and RoHS compliant 4. MSL class 1 5. Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN60065, EN60950, EN60335 • SEMKO Approved: EN60065, EN60950, EN60335 • CQC Approved: GB8898-2011, GB4943.1-2011  Applications • System appliances • Limit Switches • Sensors • Programmable controllers applications for Low Input Photocouplers and High Vceo Photocouplers • Telephone sets • Telephone exchangers • Thermostats • Signal transmission between circuits of different potentials and impedances Cosmo Electronics Corp. Document No. 69P10001.2 -1- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Outside Dimension Unit : mm 1.Dual-in-line type. 2.Surface mount type. K30101X K30102X 7.62 7.62 4.60 6.50 6.50 0.25 3.50 2.70 0.25 1.00 10.00±0.4 0.50 1.20 0.10±0.1 0~10° 0.40 3.00 3.50 4.60 1.20 2.54 2.54 13.00° 13.00° 4.Long creepage distance for surface mount type. 3.Long creepage distance type K30106X K30103X 10.16 7.62 7.62 4.60 3.50 0.30 10.16±0.50 1.20 0.25 2.70 0.25 0.90±0.25 11.80+0.2 -0.5 0~10° 0.25 3.50 3.00 0.90±0.25 1.20 2.54 0.50 TOLERANCE：±0.2mm 2.54  4.60 6.50 6.50 Device Marking Notes: cosmo 3010 814 YWW Cosmo Electronics Corp. Document No. 69P10001.2 cosmo 3010 814 YWW □ Y: Year code / WW: Week code □: CTR rank -2- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Absolute Maximum Ratings (Ta=25℃) Parameter Input Output  Symbol Rating Unit Forward current IF ±50 mA Peak forward current IFM ±1 A Power dissipation PD 70 mW Collector-emitter voltage VCEO 80 V Emitter-collector voltage VECO 6 V Collector current IC 50 mA Collector power dissipation PC 150 mW Total power dissipation Ptot 200 mW Isolation voltage 1 minute Viso 5000 Vrms Operating temperature Topr -55 to +115 ℃ Storage temperature Tstg -55 to +125 ℃ Soldering temperature 10 seconds Tsol 260 ℃ Electro-optical Characteristics Input Output (Ta=25℃) Parameter Symbol Forward voltage VF Peak forward voltage VFM Terminal capacitance Ct Collector dark current Current transfer ratio Collector-emitter saturation Isolation resistance Transfer charac- Floating capacitance teristics Cut-off frequency Response time (Rise) Response time (Fall) Cosmo Electronics Corp. Document No. 69P10001.2 Conditions Min. Typ. Max. Unit IF=±20mA - 1.2 1.4 V IFM=±0.5A - - 3.0 V V=0, f=1KHz - 30 - pF ICEO VCE=20V - - 0.1 μA CTR IF=±1mA, VCE=5V 50 - 600 % - 0.1 0.3 V - Ω VCE(sat) IF=±20mA, IC=1mA Riso DC500V 5x10 10 11 10 Cf V=0, f=1MHz - 0.6 1.0 pF fC VCC=5V, IC=2mA, RL=100Ω - 80 - KHz - 5 20 μs - 4 20 μs tr tf VCE=2V, IC=2mA, RL=100Ω -3- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo Fig.1 Current Transfer Ratio vs. Forward Current Current Transfer Ratio CTR ( % ) 140 Classification table of current transfer ratio is shown below. K3010 Model No. K3010 A K3010 B K3010 C CTR ( % ) 60 ~ 600 60 ~ 300 50 ~ 150 120 100 80 60 40 20 0 0.1 0.2 0.5 1 2 5 10 20 50 Forward Current IF (mA) Fig.2 Collector Power Dissipation Fig.3 Collector Dark Current vs. Ambient Temperature vs. Ambient Temperature -5 10 Collector Dark Current ICEO ( A ) Collector Power Dissipation PC ( mW ) 250 200 150 100 50 VCE =20V 10-6 -7 10 -8 10 -9 10 -10 10 -11 0 -55 10 0 25 50 75 -55 115 125 Ambient Temperature Ta (℃) 50 200 Forward Current IF ( mA ) Forward Current IF ( mA ) 500 40 30 20 10 50 75 100 50 T a=75° C 50° C 25° C 0° C 20 -25° C 10 5 2 1 1.0 115 125 Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69P10001.2 115 vs. Forward Voltage 60 25 75 Fig.5 Forward Current vs. Ambient Temperature 0 50 Ambient Temperature Ta (℃) Fig.4 Forward Current 0 -55 25 0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Forward Voltage VF (V) -4- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo Fig.6 Collector Current vs. Collector-Emitter Voltage Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 150 30 Collector Current IC (mA) Relative Current Transfer Ratio ( % ) Ta=25°C IF =30mA 20mA 20 15mA 10 10mA 5mA IF =1mA VCE =5V 100 50 0 0 2 4 6 8 0 -55 10 Fig.8 Collector-Emitter Saturation Voltage vs. Ambient Temperature 0. 08 I F =20mA Ic=1mA 0. 07 0. 06 0. 05 0. 04 0. 03 0. 02 0. 01 0 -55 0 20 40 60 80 Ta=25 C Ic=0.5mA Ic=1mA 4 Ic=3mA 3 Ic=5mA 2 Ic=7mA 1 0 1 Response Fall Time ( us ) Response Rise Time ( us ) 100 5 2 1 0.5 0.5 1 2 5 7 9 12 15 20 10 tf 5 2 1 0.5 0.2 0.1 0.1 0.2 0.5 1 2 5 10 10 Load Resistance RL (KΩ) Cosmo Electronics Corp. Document No. 69P10001.2 5 V CE =2V Ic=2mA Ta=25° C 50 0.03 0.1 0.2 3 Fig.11 Response Time (Fall) vs. Load Resistance tr 0.2 0.1 0.03 115 Forward Current IF (mA) V CE = 2 V Ic=2mA Ta=25° C 20 10 75 5 0 1 00 1 15 Fig.10 Response Time (Rise) vs. Load Resistance 50 50 6 Ambient Temperature Ta (℃) 100 25 Fig.9 Collector-Emitter Saturation Voltage vs. Forward Current Collector-Emitter Saturation Voltage VCE ( V ) Collector-Emitter Saturation Voltage VCE ( V ) 0. 09 0 Ambient Temperature Ta (℃) Collector-Emitter Voltage VCE (V) 0. 1 -25 Load Resistance RL (KΩ) -5- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Test Circuit for Response Time Vcc IF RL 1 4 2 3 Vce IF Vce 90% 10% tr Cosmo Electronics Corp. Document No. 69P10001.2 -6- tf http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Recommended Soldering Conditions (a) Infrared reflow soldering：  Peak reflow soldering： 260℃ or below (package surface temperature)  Time of peak reflow temperature： 10 sec  Time of temperature higher than 230℃： 30-60 sec  Time to preheat temperature from 180~190℃： 60-120 sec  Time(s) of reflow： Two  Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering：  Temperature： 260℃ or below (molten solder temperature)  Time： 10 seconds or less  Preheating conditions： 120℃ or below (package surface temperature)  Time(s) of reflow： One  Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions：  Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.  Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69P10001.2 -7- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Numbering System K3010 X Y (Z) Notes: K3010 = Part No. X = Lead form option (1, 2, 3, 6) Y = CTR rank option (A~C) Z = Tape and reel option (TLD, TRU) Option Description Packing quantity 2 (TLD) surface mount type package + TLD tape & reel option 2000 units per reel 2 (TRU) surface mount type package + TRU tape & reel option 2000 units per reel 6 (TLD) 6 (TRU) long creepage distance for surface mount type package + TLD tape & reel option long creepage distance for surface mount type package + TRU tape & reel option 2000 units per reel 2000 units per reel  Recommended Pad Layout for Surface Mount Lead Form 2.Long creepage distance for surface mount type. 4 pin L 1.Surface mount type. 4 pin SMD Unit : mm Cosmo Electronics Corp. Document No. 69P10001.2 -8- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  4-pin SMD Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P10001.2 -9- http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo 參考用  4-pin L Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P10001.2 - 10 - http://www.cosmo-ic.com K3010 Series 4PIN PHOTOTRANSISTOR PHOTOCOUPLER cosmo  Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69P10001.2 - 11 - http://www.cosmo-ic.com