9300

9300-9400 Series/Surface Mount Reed Relays Surface Mount Reed Relays Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications requirements, Coto’s 9300 and 9400 Series specification tables allow you to select the appropriate relay for your particular application. If your requirements differ, please consult your local representative or Coto’s Factory to discuss a custom design. Series Features High Insulation Resistance - 1012 Ω minimum (1013 Ω Typical) High reliability, hermetically sealed contacts for long life Molded thermoset body on integral lead frame design High speed switching compared to electromechanical relays 9300 Series Load switching (15 Watts) and high dielectric strength (500 VDC) between contacts Proven Reliable to switch telephone loads (48V, 100mA) 9400 Series Small surface mount package (0.225” x 0.550”) Low capacitance (Contact to Shield - 1.1 pF typical) Coaxial shield for 50 Ω impedance. Excellent for RF and Fast Rise Time Pulse switching (up to 2.0 GHz) Model 9300 Dimensions in Inches (Millimeters) Model 9400 Gull Wing 2 Gull Wing 2 J-Lead 2 J-Lead 2 9301 End View Radial 9401 End View (J Lead Shown) 40 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 6 9402 End View (J Lead Shown) (Europe) Tel: +31-45-5439343 / Fax +31-45-5427216 9300-9400 Series/Surface Mount Reed Relays Top View: Dot stamped on top of relay refers to pin #1 location Notes: 1 2 Consult factory for life expectancy at other switching loads. Surface mount component processing temperature: 500°F / 260°C max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. 3 Higher dielectric strength available, consult factory. 4 Consists of 56V Zener diode and 1N4148 diode in series, connected in parallel with coil. Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4% / °C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 6 E-mail: sales@cotorelay.com For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 41